1:144 Alpha Jet vacu canopy (Revell)

Brengun 1:144 Alpha Jet vacuum-formed canopy is an accessory to a kit you have already bought, not an airplane model. It replaces the thick-walled clear part from the box with a thin, optically cleaner canopy.

Scale1:144
Manufacturer Brengun
Product EAN8591111776806

Responsibility details are not available.

4.76 €
3.93 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A vacuum-formed canopy for the Alpha Jet in 1:144 scale

A clear cockpit canopy vacuum-drawn from thin film, intended for a model of the Alpha Jet trainer and light attack aircraft in 1:144 scale. It is cut for one particular kit, the Revell one, and serves as a replacement for that kit's clear part. On its own it is not a model; it is bought to go with a base kit you already have at home.

The real subject

The Alpha Jet is a twin-engine subsonic aircraft that came out of French and German cooperation and entered service in the late 1970s. It flies with a two-seat tandem cockpit and was built in two main lines: as an advanced trainer and as a light attack and reconnaissance aircraft. The long glazed canopy over both seats is its most conspicuous feature and on a model in a small scale it gives away every inaccuracy.

Why reach for a vacuum-formed canopy

An injected clear part has a thick wall, it distorts optically around the edges and in 1:144 scale it looks like bottle glass. A vacuum-drawn piece has a wall only a fraction of that thickness, so the cockpit looks bright and can be seen into. The procedure is as follows: trace the outline first with a fine alcohol marker, cut it out roughly with scissors leaving a margin, and only then sand the seating edge down on abrasive paper laid on a flat board. Test the fit dry as you go, as material can only be taken off once. Do not touch the film with your fingers, as grease is hard to remove from it. It is glued with a colorless cement for glazing or with thin white glue; super glue cannot be used, as its fumes will haze the surface.

Who the canopy is for

  • modelers who build jet aircraft in 1:144 scale
  • builders who dislike the thickness and distortion of the plastic part from the box
  • those who want the interior and the seats visible in the cockpit
  • more patient modelers who are willing to tackle sanding a seating edge

This is an accessory to a model, not a kit. The base model, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a separate clear part that replaces the cockpit canopy on a model you buy separately.

Trace the outline with a marker, cut it out roughly with a margin and gradually sand the seating edge on abrasive paper until the canopy sits exactly on the fuselage.

A colorless cement for glazing or thin white glue. Do not use super glue or polystyrene cement, as the surface would haze over.

The work itself is simple but it calls for patience. Material comes off in small steps and a mistake cannot be taken back, so test the fit as you go.

Last seen

BrengunBRL1440971:144

1:144 Alpha Jet vacu canopy (Revell)

Brengun 1:144 Alpha Jet vacuum-formed canopy is an accessory to a kit you have already bought, not an airplane model. It replaces the thick-walled clear part from the box with a thin, optically cleaner canopy.
In stock
4.76 €
Star DecalsSD35-8721:35

1:35 Panzerjäger Marder II. SdKfz 132. Eastern front.

Star Decals 1:35 Panzerjäger Marder II. SdKfz 132. Eastern front brings markings for the German self-propelled anti-tank asset deployed on the Eastern Front.
In stock
8.36 €
XtradecalX240021:24

1:24 Hawker Typhoon Mk.Ib Car Door

1:24 Hawker Typhoon Mk.Ib decals with the car door canopy from the British manufacturer Xtradecal. A standalone decal sheet for a large-scale model, not a kit.
In stock
10.36 €
AK interactiveAK9026

SANDPAPER GRAIN 1000 (WET)

A 1000 grit sandpaper for wet sanding; it smooths the marks left by coarser steps before the primer is sprayed on.
In stock
3.96 €
AberABR350371:35

1:35 Jagdpanzer IV L/48

Aber 1:35 Jagdpanzer IV L/48 is a photo-etched detail set for refining a model of the German tank destroyer on the Panzer IV chassis.
In stock
11.96 €
HGWHGW5320491:32

1:32 5 Colour Lozenge - Canvas texture

A printed sheet with a five-color lozenge pattern and a canvas texture for 1:32 scale. It is applied as a wet transfer.
In stock
10.04 €
EduardEX7571:48

1:48 Sukhoi Su-57 Frazor

1:48 Sukhoi Su-57 is an Eduard masking set with pre-cut self-adhesive masks for the glazing of a model. It is not a kit but an aid for painting.
In stock
8 €
OmaskOMK540201:48

1:48 Bristol Beaufighter mask (for Tamiya)

Omask 1:48 mask for the Bristol Beaufighter is a precisely shaped set of spray masks for clean masking of the glazing and the markings. The set is cut for the Tamiya kit.
In stock
6.76 €
Artwox ModelAW100401:350

1:350 IJN Kongo (For Fujimi 60000)

A 1:350 wooden deck for the battlecruiser IJN Kongo from Artwox Model is an adhesive veneer set that replaces the engraved plastic deck of the kit. The veneer is cut to the outline of the decks of the Fujimi 60000 kit.
In stock
42.36 €
Green Stuff WorldGSW5947

Acrylic Color RANGER GREEN

Acrylic Color RANGER GREEN is a water-thinnable acrylic paint from Green Stuff World in a subdued military green tone for figures and gaming models.
In stock
4.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.