A set of replacement barrel muzzles for two German MG42 machine guns in 1:16 scale. An add-on for a model you obtain separately.
Responsibility details are not available.
The MG42 was a German general-purpose machine gun of the Second World War of 7.92 mm caliber. It was air-cooled, and that is why its barrel is hidden in a jacket with a longitudinal slot and a row of holes; thanks to that a red-hot barrel could be changed quickly on the move. The high rate of fire the machine gun was famous for showed in the shape of the muzzle as well, where the weapon ends in a conical fitting. It is precisely this part that is most on view on a model.
The set replaces the barrel muzzles on two MG42 machine guns. In 1:16 scale the whole weapon measures around 7.6 cm, so the viewer sees its forward part from close up and every simplified shape shows. A replacement part therefore belongs among the modifications with the best ratio between the work put in and the visible result: you do not have to touch the whole model, it is enough to change a few millimeters in its most watched place.
Cut the excess material away with a sharp blade a little way from the part and sand the remainder down. The parts are not polystyrene and are bonded with a minute amount of super glue. Wash and degrease them before painting and use a primer, otherwise the coat will not hold on the smooth surface. Cut the original part off the model square and level the mating surface so that the new part follows the axis of the weapon; a tilted muzzle shows more than a difference in shape.
For builders of hardware and figures in 1:16 scale who are taking the detail of the armament further. The model, paints and glue are not included in this set, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!