A small gouge with a U profile, two pieces in the package. It is used to engrave channels, grooves and textures into modeling materials.
Responsibility details are not available.
A gouge with a U profile removes material in a narrow rounded channel. It is used where a wood texture has to be suggested, a seam deepened, an inner corner cleaned up or a small volume of material scooped out that a flat blade is too coarse for. The small size of the profile is aimed at delicate work on small parts, not at heavy removal.
Lead the tool in short strokes away from your body and take little off; depth is added by repeating the stroke, not by force. Always clamp or support the material firmly so that it cannot turn. Before working on the model, try the stroke on an offcut of the same material, because every plastic responds to a gouge differently and a harder material easily pulls it off course. When you are done, clean the burrs off the groove with fine abrasive paper.
The tool suits modelers who rework parts beyond what a kit offers: deepening seams, repairing shallow engraving after sanding or creating a surface texture of their own. Two pieces in the package mean you have a second one at hand as soon as the first loses its edge and do not have to break off in the middle of a job.
There are two pieces in the package. Paints, glue and models are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!