1:24 18inch Rotiform RB1 Wheels is a wheel set from Hobby Design for car models in 1:24 scale. The pattern carries the RB1 designation from the range of the American brand.
Responsibility details are not available.
This set from the maker Hobby Design serves as a replacement for the wheels on a model; it is not a kit of a car. The RB1 designation refers to a particular pattern from the range of the Rotiform brand.
Rotiform makes wheels in one-piece and multi-piece forms and offers a number of patterns in a built-up construction, where the lip and the center differ in finish. This difference is typical of the whole brand and it is a good idea to suggest it on a model, otherwise the wheel merges into one uniform area. The particular form of the RB1 pattern is not stated here, and it cannot be derived from the designation alone. The brand names its patterns with short codes, so they are hard to tell apart from one another without a picture.
First spray the whole rim with the lighter tone that is to stay on the lip. Once it is dry, mask the lip with a narrow strip of tape and fill the darker center in. Remove the tape at an angle and at room temperature, so that the edge does not fray. If you want a metallic sheen, reach for shades with a fine pigment. A coarse metallic looks grainy at this scale. Leave enough time between coats, as hurried drying tends to be the most frequent cause of a lifted edge.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!