Seventeen-inch Hartge wheels in 1:24 scale together with stretched tires for builds in the stance style.
Responsibility details are not available.
Hartge is a German company that has long devoted itself to modifying BMW cars, and its wheels are among the recognizable marks of cars modified that way. The set corresponds to a diameter of seventeen inches, that is in reduction to a wheel roughly eighteen millimeters in diameter. They are completed by tires with a low sidewall of the kind used on builds in the stance style, where the tread is stretched over a wide rim and the body sits tight above the ground.
In the set there are complete wheels for 1:24 scale, that is rims with the Hartge design and tires to go with them. They serve as a replacement for the wheels supplied in a kit on builds that are meant to come across as a modified car and not as a series piece from a showroom floor.
First try the wheel dry in the fender and adjust the axles accordingly; with a lowered build every tenth of a millimeter is noticed. Cut the excess material and the marks left by production away with a sharp blade a little from the part and sand the remainder carefully, so that the circumference of the rim stays round. Wash and degrease the parts before painting. Paint the rim on its own, let it dry and put the tire on only at the end.
The set suits modelers who are building a modified road car and want the wheels to match the rest of the build. Choose a suitable glue according to the material of the parts, and you will find the exact procedure in the manufacturer's instructions. Paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!