Přidali jsme nové modely do výprodeje za skvělé ceny! | ENG: We've added new model kits to our sale at great prices!

1:24 Lancia Delta S4 '86 Monte Carlo Rally

The Lancia Delta S4 '86 Monte Carlo Rally is an injection-molded plastic model of the Group B rally special in 1:24 scale from Nunu Models. The model is supplied unassembled and unpainted.

Scale1:24
Manufacturer Nunu Models
Product EAN8591111418928

Responsibility details are not available.

59.96 €
49.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Lancia Delta S4 '86 Monte Carlo Rally 1:24 (Nunu Models)

A detailed injection-molded plastic model of the Lancia Delta S4 rally special in the version from the 1986 Monte Carlo Rally, in 1:24 scale from Nunu Models. The kit captures the car's aggressive bodyshell with removable panels, full front suspension, an opening hood and a complete engine with the rear suspension and a removable rear cover. Decals for the famous Martini Racing team livery are included.

The real subject

The Lancia Delta S4 was one of the peaks of the Group B era. It combined a supercharger with a turbocharger (twin-charging) and four-wheel drive, which gave it extraordinary acceleration on the most varied surfaces. With its tubular frame and plastic body panels, the car was the technical pinnacle of its day and, despite a short career, became one of the most memorable rally legends. The model reproduces its outing at Monte Carlo in 1986.

Building and painting tips

Glue the plastic parts with a thin modeling cement for plastic; treat the bodyshell with primer before painting. Spray the paint with an airbrush in thin coats and lay the extensive sponsor livery (the decals) onto a smooth gloss base, or else overcoat it with varnish. Paint and assemble the engine, the suspension and the interior with its roll cage before closing the bodyshell up; thanks to the removable panels the mechanicals can be displayed. Glue the chromed and clear parts (the glazing) last.

Who the model is for

  • Collectors of Group B rally specials in 1:24 scale
  • Enthusiasts of the Lancia marque and the Martini Racing livery
  • Modelers who will appreciate removable panels and complete mechanicals
  • Builders with a taste for period sponsor finishes

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The Lancia Delta S4 from the 1986 Monte Carlo Rally, a Group B rally special in the colors of the Martini Racing team.

Yes, the kit has removable panels, an opening hood and a complete engine with suspension, so the mechanicals can be shown.

Yes, the package holds decals for the Martini Racing livery. Glue and paints are not included in the package.

Last seen

Nunu ModelsPN240301:24

1:24 Lancia Delta S4 '86 Monte Carlo Rally

The Lancia Delta S4 '86 Monte Carlo Rally is an injection-molded plastic model of the Group B rally special in 1:24 scale from Nunu Models. The model is supplied unassembled and unpainted.
In stock
59.96 €
FujimiFU421491:700

1:700 IJN Battleship Mutsu Outbreak of Pacific War Version

The battleship IJN Mutsu (outbreak of the war in the Pacific) in 1:700 scale is an injection-molded plastic kit of the sister ship of the Nagato from the Imperial Japanese Navy. It is supplied unassembled and unpainted.
In stock
28.76 €
KelikRSK32-00711:32

1:32 Me-262 A-1 Type 1 - Interior 3D Decals (for Trumpeter Kits)

1:32 Me-262 A-1 Type 1 - Interior 3D Decals (for Trumpeter Kits) is a set of color-printed 3D decals for the cockpit of the Me 262 in 1:32 scale, for Trumpeter kits according to the box. It is not an aircraft model.
In stock
19.16 €
RPG ModelRPG720051:72

1:72 Russian GaZ 233114 TIGER-M Defense Drone Spec.Ops

RPG Model - GAZ-233114 Tiger-M Defense Drone (1:72) is an injection-molded plastic kit of the Russian 4x4 armored vehicle in the special operations version with anti-drone equipment. The model is supplied unassembled.
In stock
17.96 €
DSPIAEDS-YPB-05

YPB-05 Tungsten Steel Broach 0,5mm

A tungsten carbide scriber blade 0.5 mm wide for restoring panel lines, from the Wing line by DSPIAE. It clamps into a holder and is drawn toward you.
In stock
23.16 €
Quinta StudioQD240321:24

1:24 Subaru Impreza WRX STi GDB Bugeye 3D-Printed & coloured Interior on decal paper (Tamiya)

Quinta Studio 1:24 Subaru Impreza WRX STi GDB Bugeye, a 3D-printed colored interior on decal paper (for the Tamiya kit) is a detail accessory, not a model. The pre-colored 3D parts are applied like a decal and turn the cabin of the Japanese rally icon into a photorealistic interior with no painting.
In stock
16.36 €
Quinta StudioQD240341:24

1:24 Jeep Wrangler Rubicon 2-Door 10th Anniversary Edition 3D-Printed & coloured Interior on decal paper (Meng)

Quinta Studio 1:24 Jeep Wrangler Rubicon 2-Door 10th Anniversary Edition, a 3D-printed colored interior on decal paper (for the Meng kit) is a detail accessory, not a model. The pre-colored 3D parts are applied like a decal and bring a photorealistic interior with no painting into the cabin of the American off-roader.
In stock
13.56 €
Quinta StudioQD322851:32

1:32 Dassault Mirage IIIE 3D-Printed & coloured Interior on decal paper (Italeri/Revell)

1:32 Dassault Mirage IIIE, a 3D-printed colored interior (for the Italeri/Revell kit) is a pre-colored Quinta Studio cockpit set: 3D-printed parts on a decal backing that are applied like a decal but have three-dimensional relief. A photorealistic cockpit with depth and no painting.
In stock
23.56 €
Quinta StudioQD240371:24

1:24 Honda Ballade CR-X 3D-Printed & coloured Interior on decal paper (Tamiya)

1:24 Honda Ballade CR-X, a 3D-printed colored interior (for the Tamiya kit) is a pre-colored Quinta Studio interior set: 3D-printed parts on a decal backing that are applied like a decal but have three-dimensional relief. A photorealistic interior with depth and no painting.
In stock
17.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.