20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:32 4 COLOR LOWER LOZENGE WITH RIB TAPES (FADED WITH FABRIC TEXTURE AND OVERPRINT EFECT)

1:32 4 COLOR LOWER LOZENGE WITH RIB TAPES (FADED WITH FABRIC TEXTURE AND OVERPRINT EFECT)

10.76 €
Add to Cart

1:32 4 COLOR LOWER LOZENGE WITH RIB TAPES (FADED WITH FABRIC TEXTURE AND OVERPRINT EFECT)

A decal sheet in 1:32 scale with the four-color lozenge pattern for the lower surfaces, complemented by rib tapes. The printing is in a faded tone with the grain of fabric.

Scale1:32
Manufacturer Old Propeller
Product EAN8591111000000

Responsibility details are not available.

10.76 €
8.89 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

German aircraft of the later part of the First World War did not carry a uniform finish on their fabric surfaces but printed cloth with a pattern of irregular polygons. The pattern broke up the outline of the machine and at the same time saved work with paint and something in weight. The lower surfaces were given a lighter execution of the same pattern than the upper ones, because against the sky they were meant to blend into the background. The covering was sewn to the ribs and the resulting seam was covered over with a narrow tape of the same cloth, so that regular stripes ran across the wing.

What the sheet offers

This is a decal sheet in 1:32 scale with the four-color pattern for the lower surfaces and with rib tapes on the same sheet. According to the name the printing is carried out in a faded tone, with the grain of fabric and with an overprint effect, so that the surface does not look like smooth colored wallpaper but like cloth. How many sheets it contains and what span it is enough for is stated in the manufacturer's instructions enclosed.

How to apply the sheet

The elements are applied as waterslide decals. The base has to be smooth, clean, degreased and evened out with a gloss clear coat, as on matte paint a silvery veil forms under the film. Cut the piece somewhat larger than needed, dip it in lukewarm water for a few seconds and let it rest on the paper until the film moves freely. Carry it over to the moistened place, set it with a soft brush and draw the excess water off with a cloth from the middle toward the edges. Use a softener to pull the film into the engraving and over the bulges of the ribs. Apply the tapes only onto dry covering, so that they run exactly above a rib. Cut any overhang past an edge off with a sharp blade once it is dry.

Terms of supply

The model of the aircraft, the paints, the clear coats and the softener are not included in the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Printed cloth with irregular polygons that German aircraft used in the later part of the First World War instead of a uniform finish.

The lower surfaces were given a lighter execution of the same pattern, so that the machine would blend into the background against the sky. This sheet is precisely the lower one.

Yes. Soak the element in lukewarm water for a few seconds, let it rest, slide it off the paper onto a moistened place and smooth it with a soft brush.

They imitate the narrow strips of cloth with which the seam of the sewn covering above the wing ribs was covered on the real subject. They are applied only onto dry covering.

On a gloss coat. On a matte surface a silvery veil forms under the film, which is removed only with difficulty afterwards.

Last seen

Old PropellerOPD320051:32

1:32 4 COLOR LOWER LOZENGE WITH RIB TAPES (FADED WITH FABRIC TEXTURE AND OVERPRINT EFECT)

A decal sheet in 1:32 scale with the four-color lozenge pattern for the lower surfaces, complemented by rib tapes. The printing is in a faded tone with the grain of fabric.
In stock
10.76 €
AML DecalsAMLA720901:72

1:72 Radar aerials FuG 202/212 for Heinkel He-219 V6-V11

FuG 202/212 radar antennas for the He-219 V6-V11 1:72 is an AML resin detailing set with the antenna system of the night radar.
In stock
10.76 €
ReskitRSU32-02351:32

1:32 Tornado IDS/ECR 1500L underwing fuel tanks (welded) (German AF / Italian AF) (2 pcs)

Tornado IDS/ECR - underwing fuel tanks 1500 l (welded), 2 pcs (1:32) is a resin 3D printed set of two tanks in the version of the Luftwaffe and the Italian Air Force for Tornado models.
In stock
23.96 €
1:48 F4U-2 Corsair 3D-Printed & coloured Interior on decal paper (Hobby Boss)-25 %Stock ClearanceFavorite
Quinta StudioQD484761:48

1:48 F4U-2 Corsair 3D-Printed & coloured Interior on decal paper (Hobby Boss)

1:48 F4U-2 Corsair, three-dimensionally printed and colored interior from Quinta Studio is the interior fitting for a model of the night version of the Corsair. The set is cut for the Hobby Boss kit.
5 leftof 6
14.76 €11.08 € You save 3.68 €
1:32 Douglas TBD-1 Devastator part 2 - Kwajalein and Wake Island Attack, February 1942
-20 %
Favorite
Art ScaleASKD320841:32

1:32 Douglas TBD-1 Devastator part 2 - Kwajalein and Wake Island Attack, February 1942

The decal sheet 1:32 Douglas TBD-1 Devastator, part 2 - the attacks on Kwajalein and Wake, February 1942 from Art Scale brings markings for a model of the American carrier torpedo bomber. It is an accessory for a model.
In stock
11.96 €9.57 € You save 2.39 €
Dead DesignVM721921:72

1:72 Shisei Kikka National Insignias And Markings (AZ/KP Models)

1:72 Shisei Kikka National Insignias And Markings is a set of pre-cut masks for the national insignia and other markings of the Japanese Kikka jet prototype in 1:72 scale from Dead Design.
In stock
6.76 €
KelikKS200021:20

1:20 Paul Ricard Circuit Base - Acrylic 3mm (180mm x 357mm) (210g)

1:20 Paul Ricard Circuit Base is a printed base for a model that puts the surface of the well-known French circuit under a finished car.
In stock
24.76 €
AberABR350L531:350

1:350 Set of barrels for German Battleship Scharnhorst (1943)

Turned brass barrel set for the battleship Scharnhorst (1943) (1:350, Aber) for models of German warships. A metal detail accessory that replaces the plastic barrels of the gun armament.
In stock
32.60 €
Nunu ModelsPNE240131:24

1:24 VOLVO 240 TURBO DETAIL-UP PARTS

Volvo 240 Turbo Detail-up parts 1:24 is a photo-etched detail set from the Nunu Models brand for the kit of the circuit-racing Volvo 240 Turbo. There is no car model in the package; it is an accessory to the kit.
In stock
29.96 €
MASTERGM720141:72

1:72 M3 Lee (late production) - 75mm M3 L/40 (long) & 37mm M6 gun barrels

1:72 M3 Lee, late production is a set of turned metal barrels for the long 75mm M3 gun and the turret 37mm M6 gun of the American medium tank.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.