The masking set 1:32 Boeing F/A-18F Super Hornet from the Czech maker Eduard. Pre-cut self-adhesive masks help toward sharp paint edges on the framing of the sizable canopy and on other areas of the model.
Responsibility details are not available.
Watch out for a mix-up: these are masks, not a photo-etched set and not a kit. The package holds no metal or plastic parts, only pre-cut self-adhesive masks that are stuck onto the surface of the model and taken off once it has been sprayed. The base model of the two-seat Super Hornet in 1:32 scale has to be obtained separately.
The 1:32 scale is large and unforgiving — every uneven paint edge shows at first glance. The cockpit canopy of the two-seat version is long and its framing comes out badly with tape cut by hand. Pre-cut masks follow the shape, so the result is symmetrical and repeatable. The exact contents of the package are not stated here; before buying the set, also check that it matches your kit.
Degrease the transparent parts first in lukewarm water with dish soap and let them dry completely. Transfer the mask with tweezers, settle it and press the edges down carefully with a blunt toothpick — an edge that has not seated is the most common cause of bleeding. Lay the paint on in thin coats; in a large scale three light passes are better than one heavy one. Take the mask off with an angled pull while the paint has only just set. Once it is off, check the edges and correct any bleeds with a brush.
This is a masking set, not a kit. The model, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!