An add-on upgrade set for an F-15E model in 1:32 scale, intended for Tamiya kits.
Responsibility details are not available.
The F-15E is the two-seat strike rendition of the F-15 fighter. The rear seat belongs to the weapon systems officer, along the sides of the fuselage the aircraft carries conformal fuel tanks and under them a row of pylons, so it differs from the single-seat versions not only in the crew but in its whole silhouette. In a large scale every detail that is left open or picked out on a model stands out.
It is an add-on set for a model, not a kit in itself. It is shaped to suit the F-15E kits from Tamiya in 1:32 scale, so the parts fit a particular base and do not have to be adapted in general. The extent of the set and the assembly procedure are described in the enclosed manufacturer's instructions.
The parts are not polystyrene and are bonded with super glue. Cut the excess material away with a sharp blade a little way from the part and sand the remainder down so that the mating surfaces stay flat. Wash and degrease everything before painting, otherwise the paint will not hold on the smooth surface. Try every part dry first and only then glue it; in large scales a deviation of a few tenths of a millimeter shows. Lay the paint down in thin coats so that the fine surface relief is not lost.
The set belongs to modelers who are building a large F-15E and want to take the level of detail beyond the base kit. The kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!