1:32 Hawk 81-A2

1:32 Hawk 81-A2 is an Eduard photo-etched set for a model of the Curtiss Hawk 81-A2 fighter in 1:32 scale, aimed above all at the cockpit. It is a smaller, largely pre-painted set, not a full photo-etch for the whole aircraft.

Scale1:32
Manufacturer Eduard
Product EAN8691111000007

Responsibility details are not available.

9 € 6.76 €
5.59 € without VAT
−25 % You save 2.24 €
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard photo-etched set 1:32 Hawk 81-A2

A set of photo-etched parts for detailing a plastic model of the Curtiss Hawk 81-A2 fighter in 1:32 scale. It is not an airplane kit but an accessory to one: thin metal parts take the place of plastic shapes that cannot be made fine enough in a mold. Eduard, the Czech maker from Obrnice, generally makes several sets of differing extent for one subject. This one belongs among the smaller ones, with mostly pre-painted parts that are glued on straight away without painting.

Where it goes on the model

The weight of the smaller photo-etched sets lies in the cockpit: the instrument panel, the side consoles, the levers and the seat harness. It is exactly these items that are most in view once the canopy is closed, and on which plastic parts look oversized. The more extensive photo-etch from the same maker for the same aircraft reaches further, onto the exterior surfaces, the engine section or the landing gear bays. More than one set is therefore made under the same name; tell them apart by their extent.

Usage tips

Cut the parts off the fret with a sharp scalpel on a hard surface rather than snapping them off. Make the bends in a bending tool or between two razor blades, so that they are crisp and straight. Do not sand the pre-painted surfaces and do not glue them with cyanoacrylate spread beyond the joint, which will fog the paint. The proven approach is a spot of thin cyanoacrylate applied with a toothpick; on larger areas a glue made for photo-etch or a gloss acrylic clear helps. Degrease the unpainted parts before gluing and give them a primer coat.

Who the set is for

  • Modelers who build the Hawk 81-A2 in 1:32 scale
  • Those who want to detail the cockpit without a major intervention in the model
  • Builders with the canopy open, where the interior is in view
  • Beginners with photo-etch, who get on with pre-painted parts

The set is an accessory to a plastic model. The model itself, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of photo-etched metal parts with which you detail a plastic model. The model itself is not included in the package.

In extent. The smaller sets aim mainly at the cockpit and are largely pre-painted; the more extensive photo-etch covers the exterior parts of the model as well. Check the particular contents against the extent of the set.

The pre-painted parts are glued on straight away. The unpainted parts are best degreased, sprayed with a primer and only then painted in the final shade.

The export designation of a Curtiss fighter of the P-40 series of the early 1940s, close to the P-40B version. Machines of this form are known from the fighting in China and Burma.

Last seen

1:32 Hawk 81-A2-25 %Stock ClearanceFavorite
EduardED332971:32

1:32 Hawk 81-A2

1:32 Hawk 81-A2 is an Eduard photo-etched set for a model of the Curtiss Hawk 81-A2 fighter in 1:32 scale, aimed above all at the cockpit. It is a smaller, largely pre-painted set, not a full photo-etch for the whole aircraft.
Last one!
9 €6.76 € You save 2.24 €
VallejoVAL72482

Xpress Monastic Green

The green shade Monastic Green from the Xpress Color acrylic line by Vallejo. A single coat gives a figure both the base tone and the shading.
In stock
3.96 €
Firma4949C079/481:48

1:48 Barrels 200l

1:48 Barrels 200l is a resin set of 200 liter drums in 1:48 scale from the company Firma49, an ideal load and scenic accessory.
In stock
5.16 €
Dead DesignVM320321:32

1:32 Mitsubishi A5M4 Claude

A set of spray masks for the Mitsubishi A5M4 Claude model in 1:32 scale. They are stuck on before spraying and leave crisply bounded areas behind.
In stock
9.60 €
Kovozávody ProstějovKPM04871:72

1:72 L-23 Super Blaník Over Europe

An injection-molded plastic kit of the Let L-23 Super Blanik Over Europe in 1:72 scale from the manufacturer Kovozavody Prostejov (KP) — the Czechoslovak two-seat training GLIDER (an engineless sailplane).
In stock
11.96 €
BroncoCB351191:35

1:35 Sturmgeschutz III E Sd.Kfz.142/1 (Eastern Front 1942)

A plastic model of the German assault gun Sturmgeschütz III Ausf. E (Sd.Kfz.142/1) in 1:35 scale from Bronco , in the version for the Eastern Front in 1942. The kit captures the early variant of the StuG III with the short gun. Glue and paints are not included in the package.
In stock
37.96 €
MiniartMA370781:35

1:35 T-34-85 Czechoslovak Prod. Late Type

Plastic kit of the T-34-85 — Czechoslovak production, late type in 1:35 scale from MiniArt. The model captures the T-34-85 tank from postwar license production in Czechoslovakia, which differed in detail from the Soviet machines.
In stock
44.36 €
Kovozávody ProstějovKPM05171:72

1:72 P-26 Peashooter Pre war

An injection-molded plastic kit of the Boeing P-26 Peashooter Pre war in 1:72 scale from Kovozavody Prostejov (KP) — the American prewar all-metal fighter monoplane.
In stock
13.96 €
GunzeH086

Hobby color - ostrá červená

A rich red from the water-thinnable Hobby Color range. It covers insignia, warning stripes and small safety markings, and is applied with a brush or an airbrush.
In stock
3 €
GunzeH035

Hobby color - kobaltovďż˝ modrďż˝

A deep blue cobalt shade of acrylic paint with a water-thinnable binder, in a bottle of ten milliliters. Prepared for spraying with an airbrush, it can be thinned with water or with the maker's own thinner of the same brand.
In stock
3 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.