1:32 Ki-84 Hayate double-sided express mask for Hasegawa

1:32 Ki-84 Hayate double-sided express mask for Hasegawa

7.96 €
Add to Cart

1:32 Ki-84 Hayate double-sided express mask for Hasegawa

Art Scale 1:32 Ki-84 Hayate, double-sided masking set is a set of pre-cut masks for spraying the canopy framing of the Japanese fighter from both sides. It is not a kit but an accessory for a build.

Scale1:32
Manufacturer Art Scale
Product EAN8891151000044

Responsibility details are not available.

7.96 €
6.58 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Art Scale 1:32 Ki-84 Hayate masking set, double-sided version

The set contains masks cut to the outline of the clear parts of the Nakajima Ki-84 Hayate model in 1:32 scale. It is neither a model nor a kit, but an aid for painting that replaces the tedious trimming of masking tape with a knife directly on the glazing. The shapes are cut for the particular Hasegawa kit, so they line up with the engraved framing. The double-sided designation means that the set allows for masking the clear part from the outside and from the inside; the framing of the sliding section of the canopy can then be sprayed in the interior color from inside, which is a clearly visible detail in a large scale.

The real subject

The Nakajima Ki-84 Hayate was a single-engine fighter of the Japanese Army Air Force from the late period of the Second World War. It was powered by a powerful Nakajima Homare radial engine, the design had retractable landing gear, a good rate of climb and, by Japanese standards, heavier armament and armor protection. It was among the most technically advanced Japanese fighters of its day.

How to work with the masks

Wash and degrease the clear part, otherwise the mask will not hold. Lift the individual masks off the sheet with a sharp point or tweezers and lay them down so that the edge lines up with the engraved frame; work the pressure from the center outward. Go over the edges once more with a toothpick, as that is where the cleanliness of the edge is decided. Spray in thin coats and preferably in several passes; a heavy coat peels when the mask is lifted. The usual order is the interior color, then the primer and the covering shade of the exterior. Lift the mask once the paint has dried, while it is not yet fully cured. Remove glue residue with a mild product that will not attack clear plastic.

Who the set is for

  • Modelers building Japanese fighters in 1:32 scale
  • Those who want the framing treated from the inside as well
  • Builders working with an airbrush who need a sharp edge
  • Anyone for whom masking the glazing takes the most time

It is a masking accessory for a build, not a kit. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a masking set, an accessory for a build. The model and the paints are not included in the package.

The set allows for masking the clear part from the outside and from the inside, so the framing can also be sprayed in the interior color.

No. The masks are cut for the Hasegawa kit; another tooling has the glazing shaped differently.

Lift it right after the paint has dried, while it is not yet fully cured, and pull it at an angle across the edge rather than straight up.

Last seen

Art ScaleASKM320061:32

1:32 Ki-84 Hayate double-sided express mask for Hasegawa

Art Scale 1:32 Ki-84 Hayate, double-sided masking set is a set of pre-cut masks for spraying the canopy framing of the Japanese fighter from both sides. It is not a kit but an accessory for a build.
In stock
7.96 €
MASTERAM720051:72

1:72 Supermarine Spitfire E wing early - Hispano 20mm & .50cal in fairings (two versions)

MASTER 1:72 Supermarine Spitfire early E wing - turned metal barrels for the Hispano 20 mm and the .50 cal machine guns in fairings (two versions) is an accurate metal accessory for a model.
In stock
6.36 €
1:32 A-26B 3D-Printed & coloured Interior on decal paper (Hobby Boss)-25 %Stock ClearanceFavorite
Quinta StudioQD321271:32

1:32 A-26B 3D-Printed & coloured Interior on decal paper (Hobby Boss)

A colored decal set for the interior of a model of the A-26B in 1:32 scale with a three-dimensional effect. It is applied over a gloss base and replaces the flat parts of the kit.
Last one!
54.36 €40.76 € You save 13.60 €
Model MakerMM-D720311:72

1:72 Polish Lockheed-Martin F-16C/F-16D NATO Tiger Meet 2014

The Model Maker 1:72 Polish F-16C and F-16D, NATO Tiger Meet 2014 decal set covers both the single-seat and the two-seat version of the Viper in 1:72 scale.
In stock
7.96 €
Master BoxMB35841:35

1:35 German Infantry - Western Europe - 1944-45

The plastic set of figures German Infantry - Western Europe - 1944-45 in 1:35 scale from Master Box captures German infantrymen from the end of the war. It is supplied unassembled and unpainted.
In stock
13.56 €
1:48 Lockheed F-104J Starfighter seatbelts STEEL-25 %Stock ClearanceFavorite
EduardFE10511:48

1:48 Lockheed F-104J Starfighter seatbelts STEEL

Eduard 1:48 Lockheed F-104J Starfighter seatbelts STEEL is a set of color-printed photo-etched steel seat harness belts for detailing the Starfighter cockpit in 1:48 scale.
2 leftof 5
6.80 €5.12 € You save 1.68 €
ELEFANTELE352171:35

1:35 GERMAN WEHRMACHT JERRY CANS "NIRONA", 1943, PATTERN, CLOSED, 10 PSC

German Wehrmacht NIRONA jerry cans, 1943 pattern, closed, 1:35 is an add-on set from Elefant: 10 miniature twenty-liter cans with the NIRONA marking to the 1943 pattern, in the form with a closed cap. It is not a model of a vehicle but accessories for completing kits and dioramas.
In stock
9.96 €
AoshimaAO051781:700

1:700 I.J.N SEAPLANE TENDER AKITSUSHIMA

1:700 IJN Akitsushima : a kit of the Japanese seaplane tender for flying boats from Aoshima. An unusual support vessel with a massive stern crane, a treat for collectors of the Imperial Japanese Navy.
In stock
23.96 €
Colibri DecalsCD350351:35

1:35 T-34-76 model 1941. Part I Battles in main direction

The set of waterslide decals Colibri Decals 1:35 T-34-76 model 1941, Part I brings markings for Soviet T-34 medium tanks with the 76 mm gun from the early part of the Second World War.
In stock
7.96 €
MAiMMAIM240371:24

1:24 Post Apocalyptic Woman with jerry can #1

A collector resin figure of a post-apocalyptic woman with a jerrycan, variant no. 1, from MAiM in 1:24 scale. A character for apocalyptic dioramas.
In stock
19.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.