CMK 1:32 rudder pedals for the P-40E and later versions is a small resin accessory for the cockpit of a Curtiss P-40 model. It is not a kit, but a replacement detail part.
Responsibility details are not available.
The product is not a model of an aircraft. These are resin rudder pedals for the cockpit of a Curtiss P-40 model in the E version and in the later forms, in 1:32 scale. A resin casting allows thinner arms and finer pressed detail than the mass-produced plastic part offers, and in a large scale the difference is clearly apparent when looking into an open cockpit.
The Curtiss P-40 was a single-engine fighter with a liquid-cooled V engine and a characteristic radiator housing under the forward part of the fuselage. The E version is among the most widespread forms and carried its armament in the wing. The cockpit of the P-40 is fairly open, and with the canopy removed or slid back you can see into it right down to the floor, so the details of the rudder controls are not hidden away.
Wash the parts with lukewarm soapy water, so that the mold release agent is removed. Cut the casting blocks off with a fine saw and sand the surfaces down; when sanding resin, work wet and protect your airways. It is glued with cyanoacrylate glue (super glue); ordinary cement for plastic will not join resin. We recommend painting the parts before gluing them into the cockpit and bringing them out with a fine wash, which lifts the shadows between the small elements. Seat the pedals only once the cockpit floor is in place, so that they sit at the right angle.
This is an accessory, not a kit. The base model, glue and paints are not included in the package, unless stated otherwise. Check the match with your own kit.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!