1:32 P-51D Mustang seat with safety belts

P-51D Mustang seat with safety belts is a resin seat with cast seat belts in 1:32 scale from the Quickboost brand. It replaces the seat from the kit without your having to assemble the belts from photo-etched metal.

Scale1:32
Manufacturer Aires/Quickboost
Product EAN8591111736244

Responsibility details are not available.

6.36 €
5.26 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A resin seat with belts for the P-51D Mustang, 1:32 (Quickboost)

This is a separate resin part, not an aircraft kit. The pilot's seat has the safety belts cast directly with the body of the seat, including the natural sag of the straps and the buckles indicated. That does away with the most laborious part of improving a cockpit, that is, assembling and shaping the belts from photo-etched metal. Quickboost is an accessory range of the Czech manufacturer Aires focused on quick one-piece improvements. In 1:32 scale the seat is a prominent element, because it is clearly visible from an open cockpit.

The real subject

The P-51D Mustang was an American single-engine fighter from the end of the Second World War, famous for its long range and its role as an escort fighter for bomber formations. It was powered by the Merlin V12 built under license in the United States, and the armament consisted of 12.7 mm machine guns in the wing. The D version was given a bubble canopy and a cut-down rear fuselage, thanks to which the pilot had an excellent view to the rear. It is precisely the clearly visible cockpit that makes a quality seat one of the most rewarding improvements to a model.

Usage and painting tips

Wash the part in warm water with a drop of detergent so that the mold release residue disappears. Cut the casting block off with a saw and level the surface on sandpaper, sanding wet and with respiratory protection. It is glued with cyanoacrylate glue. Apply a primer before painting. Paint the frame of the seat and the belts separately; the buckles can be suggested with silver paint applied with the tip of a brush. The sag of the straps comes out after a dark wash run into the folds and a gentle lightening of the edges by drybrushing.

Who the part is for

  • Modelers who are building the Mustang in the large 1:32 scale
  • Those who want to avoid assembling belts from photo-etched metal
  • Builders of models with an open cockpit or a slid-back canopy
  • Beginners in working with resin, as the part is simple and self-contained

This is an accessory part, not an aircraft model. The kit, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

You do not. The safety belts are cast directly with the seat, including the sag of the straps, so nothing has to be assembled or shaped.

It is not. It is a separate accessory part with which the seat is replaced in a plastic model in 1:32 scale that has already been bought.

It is glued with cyanoacrylate glue, as cement for plastic does not hold. Apply a primer before painting, then paint the frame and the belts separately and bring the folds out with a dark wash.

Yes. It is a simple self-contained casting; all you do is cut the casting block off, level the surface and glue the part in place of the original seat.

Last seen

Aires/QuickboostQB322141:32

1:32 P-51D Mustang seat with safety belts

P-51D Mustang seat with safety belts is a resin seat with cast seat belts in 1:32 scale from the Quickboost brand. It replaces the seat from the kit without your having to assemble the belts from photo-etched metal.
In stock
6.36 €
1:24 Mercedes Benz 300 Sl White Finisched-25 %Stock ClearanceFavorite
TamiyaTA211521:24

1:24 Mercedes Benz 300 Sl White Finisched

The Mercedes-Benz 300 SL in a white finish, 1:24 scale is a finished collector's model from Tamiya: it is supplied assembled and painted, ready to be displayed. It is not a kit.
2 left
112.76 €84.56 € You save 28.20 €
Aires/QuickboostQB721231:72

1:72 Hawker Hurricane Mk. II Fishtail exhaust pipes

Resin fishtail exhausts for the Hawker Hurricane Mk. II in 1:72 scale from Quickboost. Faithful exhaust pipes; this is not an airplane model.
In stock
3.56 €
TamiyaTA69948

Construction Series Pla-Paper 0.05 mm B4 Size (364 x 257mm) (4 Pcs.)

Tamiya Construction Series Pla-Paper 0.05 mm is a set of four very thin plastic sheets in B4 format (364 x 257 mm). The material is almost as flexible as paper, cuts with scissors and glues with ordinary plastic cement — ideal for scratch building.
In stock
9.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.