1:32 Rutan Quickie

The small-series kit 1:32 Rutan Quickie from the Brengun brand captures a tiny single-seat homebuilt aircraft with a tandem arrangement of lifting surfaces. The model is supplied unassembled and unpainted.

Scale1:32
Manufacturer Brengun
Product EAN8591111000000

Responsibility details are not available.

31.56 €
26.08 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:32 Rutan Quickie — a small-series Brengun kit

A model of the unusual single-seat Quickie aircraft in the large 1:32 scale from the Czech brand Brengun. The real subject is so small that even in 1:32 scale the finished model comes out in size more like an ordinary kit in 1:48 — all the better for the detail to show on it. It is a small-series kit, that is, a product in a smaller run, with which you have to reckon on cleaning the parts up by hand and on preparing the joints more carefully than with mass-produced injection-molded plastic. The same manufacturer also makes a version in a smaller scale, so you can choose the size for your display case.

The real subject

The Quickie is a single-seat aircraft designed according to the concept of Burt Rutan and offered to builders of homebuilt aircraft. Characteristic is the tandem arrangement of two lifting surfaces: the front surface carries the main landing gear wheels at its tips and the rear surface is a classic wing, so that the machine gives the impression of the letter X when seen from above. It was powered by a small air-cooled industrial engine with an output in the order of a few tens of horsepower. It was precisely the combination of a minute power unit with an aerodynamically clean airframe that made the aircraft an example of an exceptionally efficient design; the first flight took place in the second half of the 1970s.

Building and painting tips

Wash the parts before gluing in lukewarm water with detergent and remove the release agent. Cut the casting blocks off with a saw or a cutter; do not snap them off; do the sanding wet and with respiratory protection. Glue small-series castings with cyanoacrylate glue and always try the joints dry first. With a tandem arrangement, double-check the angles of both lifting surfaces and whether they are parallel with each other — asymmetry is immediately visible on this type. The surface of the aircraft is smooth and glossy, so devote time to the primer and to sanding the base down; apply gloss varnish in thin layers. Before the decals, varnish the surface to a gloss, and after the decals even the surface out according to the degree of gloss you want.

Who the model is for

  • Collectors of untraditional and experimental designs
  • Modelers who want a subject with small dimensions in a large scale
  • Builders with experience of small-series kits and cyanoacrylate glue
  • Anyone interested in civil aviation and homebuilt aircraft

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Rather for a modeler with practice. Small-series kits have a bulkier casting system, the parts have to be leveled by hand and the joints have to be tried dry.

The code series corresponds to cast parts, so we recommend reckoning with cyanoacrylate glue — check this against the package.

The real subject is a very small aircraft, so even in 1:32 scale the model comes out compact.

Whether decals are present and how many there are is stated on the box.

Last seen

BrengunBRL320451:32

1:32 Rutan Quickie

The small-series kit 1:32 Rutan Quickie from the Brengun brand captures a tiny single-seat homebuilt aircraft with a tandem arrangement of lifting surfaces. The model is supplied unassembled and unpainted.
In stock
31.56 €
TrumpeterTR022141:32

1:32 A-10A THUNDERBOLT?

A plastic kit of the American A-10A Thunderbolt II attack aircraft in 1:32 scale. The model is supplied unassembled and unpainted.
In stock
89.56 €
Wingnut WingsWNW320531:32

1:32 Gotha UWD

A premium injection-molded plastic kit of the Gotha WD (UWD) in 1:32 scale from Wingnut Wings, the German twin-engine floatplane of the First World War with rich contents.
In stock
219.96 €
AiresAIR73141:72

1:72 Bf 110 flaps

A resin set of flaps for the Bf 110 in 1:72 scale from Aires. It lets you fit the flaps in the lowered position; it is not an aircraft model.
In stock
10.80 €
Heavy HobbyPT480031:48

1:48 WWII German Panther Early Version Tracks

Tracks for the early version Panther from Heavy Hobby are a 3D printed replacement for the tracks of a model of the German tank in 1:48 scale.
In stock
18.76 €
AMMO of Mig JimenezA.MIG-8696

Standard Blade Set – 4 pcs

AMMO Standard Blade Set, 4 pcs is a set of four spare blades from AMMO of Mig Jimenez for a modeling craft knife. The blades are very sharp.
In stock
5.96 €
1:72 LVT Tracks Set-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-89541:72

1:72 LVT Tracks Set

1:72 LVT Tracks Set is a replacement set of tracks for models of the American LVT amphibious tracked vehicles in 1:72 scale by AMMO of Mig Jimenez. The vehicle model itself is not included.
Last one!of 4
13.96 €10.48 € You save 3.48 €
SX-ArtSXA790011:72

1:72 Barrel 200l type 1 (12 pcs.)

The add-on set 1:72 Barrel 200l type 1 (12 pcs.) from SX-Art contains twelve 200 liter drums for dioramas and load scenes in 1:72 scale.
In stock
11.56 €
GAS HANSGH-T720091:72

1:72 Pz. I Ausf. F Early Tracks

1:72 Pz. I Ausf. F Early Tracks is a separate set of tracks in 1:72 scale for the German heavily armored light tank Pz. I Ausf. F in its early form. It is not a vehicle kit but an accessory for the running gear.
In stock
13.16 €
GAS HANSGH-T720101:72

1:72 Pz. I Ausf. F Late & Pz. II Ausf. J Tracks

A set of 1:72 tracks for the late Pz. I Ausf. F and for the Pz. II Ausf. J is a separate running gear accessory for a pair of German heavily armored light tanks. A vehicle model is not included.
In stock
13.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.