1:35 G7107 in German Service with infantry

The plastic kit G7107 in German Service with infantry in 1:35 scale from the ICM company captures an American truck used by the German army from captured stocks, supplemented by infantry figures.

Scale1:35
Manufacturer ICM
Product EAN8591111773188

Responsibility details are not available.

41.96 € 31.48 €
26.02 € without VAT
−25 % You save 10.48 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The G7107 in German service with infantry figures, 1:35 from the ICM company

An injection-molded plastic kit of the American G7107 truck in 1:35 scale, in the form in which vehicles of this type were used by German units. According to the name the package contains, besides the vehicle, a set of German infantry figures, so the model is suitable directly as the basis of a smaller scene. ICM is among the Ukrainian manufacturers, and its trucks usually have an elaborate cab and chassis.

The real subject

The G7107 is an American truck with drive to both axles and a payload of around one and a half tons, built from the beginning of the 1940s. Vehicles of this series were supplied in large numbers to the Allies as part of wartime materiel aid, mainly to the Eastern Front, where they proved themselves as a reliable means of transport for troops and loads. The vehicles had a metal cab and a cargo bed in a wooden or a metal version. Some of them fell into the hands of German units in the fighting, and these used them on in their original role, usually only with a repainted finish and new markings. It is precisely this less usual chapter in the vehicle's service that the kit captures.

Building and painting tips

Assemble and paint the chassis and the drivetrain before you fit the cargo bed and the cab. It is advisable to finish the cab including the interior and the clear parts, which are painted only after masking. The wooden parts of the cargo bed will stand out if you add thin oil glazes in the direction of the grain after the base shade. With captured equipment the transition between the original and the new finish tends to be interesting, so it pays to work with fine wear on the edges. Paint the figures separately from the vehicle and attach them to it only at the end.

Who the model is for

  • Modelers who collect trucks of the Second World War in 1:35 scale
  • Anyone interested in the subject of captured equipment in foreign service
  • Builders of dioramas who will appreciate a vehicle and figures in one package
  • Modelers with intermediate experience who want a combination of equipment and figure work

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

An American truck with drive to both axles and a payload of around one and a half tons, built from the beginning of the 1940s and supplied to the Allies as part of wartime materiel aid.

Some of these vehicles fell into the hands of German units in the fighting, and these used them on to carry loads and troops, usually with a new finish and markings.

According to the name of the kit, yes, they are German infantry figures. Their number and composition are given on the box and in the instructions.

It is manageable for modelers with intermediate experience. Reckon with work on the chassis and with painting the figures, which takes a little practice.

Last seen

1:35 G7107 in German Service with infantry-25 %Stock ClearanceFavorite
ICMICM355881:35

1:35 G7107 in German Service with infantry

The plastic kit G7107 in German Service with infantry in 1:35 scale from the ICM company captures an American truck used by the German army from captured stocks, supplemented by infantry figures.
3 left
41.96 €31.48 € You save 10.48 €
AK interactiveAK9168

SCISSORS – SPECIAL FOR PHOTOETCHED PARTS

Scissors specially for photo-etched parts by AK Interactive are sturdy modeling scissors with rigid jaws for a clean cut of photo-etch without deformation.
In stock
8.76 €
Model CraftPDT5200/3

3 Pce Stainless Steel Carvers Set

The Model Craft 3-piece stainless steel carvers set is a three-piece set of modeling knives and gravers for fine shaping and cleaning up.
In stock
8.76 €
U-STARUA90180

Mini Table Vise (7cm*17 cm)

The U-STAR bench tool for folding photo-etched parts in the larger size clamps a thin metal part and makes it possible to fold it accurately and in a sharp edge.
In stock
71.56 €
3Detail3D049

Roll ROD II.

Roll ROD II from the Czech maker 3Detail is a jig for rolling photo-etched parts into tubes and curves. It is another version in the same range, complementing the possibilities for forming cylindrical sections.
In stock
8.60 €
3Detail3D032

Rolovačka průměrů velká

The large 3Detail rolling tool for diameters is a larger jig for rolling photo-etch into curved shapes with larger diameters.
In stock
2.60 €
3Detail3D046

Roll ROD I.

Roll ROD I from the Czech maker 3Detail is an aid for rolling flat photo-etched parts into cylindrical shapes. It is useful wherever a straight strip has to become a tube or a curve.
In stock
7.20 €
AK interactiveAK9169

MULTIFUNCTION BAR TOOL FOR PUTTY

AK interactive Multifunction Bar Tool for Putty is a metal multifunction modeling tool, a spatula for work with putty and modeling compounds. It is a modeling product, not a paint and not a kit.
In stock
5.56 €
AK interactiveAK9548

STEEL WORK BLOCK

The AK Interactive Steel Work Block steel work block, a heavy flat surface for working photo-etched parts, riveting, forming and cutting.
In stock
19.96 €
RP ToolzRP-MIC

Micro Conical Roller

The RP Toolz Micro Conical Roller is a stainless steel conical (stepped) roller 125 mm long for shaping and rounding small photo-etched parts and tubes.
In stock
17.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.