1:35 Sd.Kfz 222 early road wheels flat tires type 2 (4pcs + spare for Hobby Boss)

1:35 Sd.Kfz 222 early road wheels flat tires type 2 (4pcs + spare for Hobby Boss)

16.36 €
Add to Cart

1:35 Sd.Kfz 222 early road wheels flat tires type 2 (4pcs + spare for Hobby Boss)

Early wheels of the Sd.Kfz 222 in 1:35 scale in the collapsed state, pattern type 2. The name states four pieces and one spare, and the parts are adapted for the Hobby Boss kit.

Scale1:35
Manufacturer Pimp My Miniatures
Product EAN87991111783557

Responsibility details are not available.

16.36 €
13.52 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The fifth wheel everybody notices

On light armored cars the spare was not carried inside but outside, on a bracket at the side of the hull, where it was at hand and where everyone looking over a finished model sees it too. In period photographs it tends to be worn by hands, faded by the sun and sometimes carries quite a different pattern from the wheels the car ran on. Anyone who repeats this small thing moves the credibility of the build a step further.

According to the name the package is made up of four wheels for the axles and one spare, with the rubber worked in the deflated shape and carrying the profile numbered two. It is intended for early production examples of the Sd.Kfz 222, that is for the cars which ran in the first campaigns of the war. A collapsed tire suits a laid-up machine, but it works just as well when a diorama is to show a snapshot from a repair.

This variant is listed for the Hobby Boss kit, so the mating surfaces match its chassis. Once glued it pays to check whether the car stands level and whether all the wheels meet the base with the same part of the footprint.

To close, one practical note on painting: it is good to shade the spare wheel lighter and not to foul it with mud the way the others are. The difference is unobtrusive, but it is of such things that the impression of a machine with real service behind it is built.

Cars of the early series were delivered to reconnaissance companies from the first campaigns onward and their appearance changed gradually during production. Anyone building an older example should bring the running gear into line with that, because it was there that the later changes showed first.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

On an outer bracket at the side of the hull, where the crew had quick access to it.

Deflated, that is collapsed over the edge of the rim.

For the early production rendering.

A lighter shade and a smaller amount of deposits are recommended, because the spare was not carried along the ground.

Last seen

Pimp My MiniaturesAFVs35-2051:35

1:35 Sd.Kfz 222 early road wheels flat tires type 2 (4pcs + spare for Hobby Boss)

Early wheels of the Sd.Kfz 222 in 1:35 scale in the collapsed state, pattern type 2. The name states four pieces and one spare, and the parts are adapted for the Hobby Boss kit.
In stock
16.36 €
1:32 Mark 82 Thermally Protected bombs with BSU-86 Snakeye II fins (4pcs)-25 %Stock ClearanceFavorite
ReskitRS32-03471:32

1:32 Mark 82 Thermally Protected bombs with BSU-86 Snakeye II fins (4pcs)

Reskit 1:32 Mark 82 Thermally Protected with BSU-86 Snakeye II fins combines a thermally protected bomb casing with a second-generation retarding unit. The package contains four pieces.
6 left
9.16 €6.88 € You save 2.28 €
CMKCMK80741:48

1:48 Marder IIIM Exterior Detail Set & Driver Half Figure for Tamiya kits

CMK 1:48 Marder IIIM Exterior Detail Set and driver half figure is a resin (3D-printed) add-on set for sharpening up the exterior of the Tamiya Marder III Ausf. M tank destroyer in 1:48 scale.
In stock
11.16 €
Model MakerMM-D721671:72

1:72 Sukhoi Su-22M4 Spirit of Stefan Stec

Sukhoi Su-22M4 Spirit of Stefan Stec is a decal set in 1:72 scale from the brand Model Maker for a Su-22M4 machine in a special named finish.
In stock
14.36 €
MASTERGM160091:16

1:16 PzKpfw I - MG-13K gun barrels & antenna (for Takom kit)

PzKpfw I - MG-13K machine gun barrels and antenna (1:16) is a metal and printed set from MASTER for refining models of the German light tank.
In stock
13.96 €
ReskitRSU48-05361:48

1:48 F/A-18 Hornet exhaust nozzles for Hasegawa kit

F/A-18 Hornet exhaust nozzles are a 3D-printed (resin) detail accessory for building the American carrier-based fighter in 1:48 scale, designed for the Hasegawa injection-molded kit. This is not a standalone model, but a set of replacement parts.
In stock
24.36 €
Quinta StudioQDS+486021:48

1:48 L-39C 3D-Printed & coloured Interior on decal paper (Trumpeter) (Small version) (with 3D-printed resin parts)

A detailed cockpit accessory, the L-39C 3D-printed colored interior on decal paper in 1:48 scale from Quinta Studio , intended for the Trumpeter kit. It is a set for improving the interior, not a stand-alone model.
In stock
26.36 €
EduardFE15861:48

1:48 Hughes MH-6 J - Seatbelts Steel Zoom Set for ICM

Eduard 1:48 Hughes MH-6J - steel seat belts ZOOM is a set of preprinted steel etched safety belts for the cabin.
In stock
8 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.