1:35 Waffen-SS Anorakanzug at rest No.1

A resting figure in Anorakanzug winter clothing, Waffen-SS uniform, pose No. 1 in 1:35 is a separate resin figure from the maker PANZER ART for a restful winter scene.

Scale1:35
Manufacturer PANZER ART
Product EAN9991111315112

Responsibility details are not available.

13.96 €
11.54 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A resting figure in Anorakanzug winter clothing, Waffen-SS uniform, pose No. 1, 1:35, PANZER ART

A separate resin figure in 1:35 in a restful position. Take the Waffen-SS marking as a statement about the type of uniform, that is about the cut of the clothing and the camouflage pattern you will be painting. The Anorakanzug is a winter suit of anorak cut with a loose blouse and trousers, on period examples with a reversible treatment where one side is white and the other camouflaged.

Why a restful pose

Resting figures are valuable in a diorama, because the scene does not read as overdone. A relaxed body, leaning or seated, takes a close view better and naturally fills the free areas on a hull, by a wheel or beside a vehicle. The marking pose No. 1 means the first variant of the stance within the line; the manufacturer sells the other variants separately and they can be combined.

Building and painting tips

Wash the casting in lukewarm water with dish soap to remove the remains of mold release agent. Cut the casting blocks off with a fine saw and level the faces with a file; sand resin wet and with your breathing protected. Look over the parting lines against the light and scrape any flash off with a scalpel. With restful poses, check whether the figure bears on a base across its whole face; handle any fine-tuning by sanding the underside, not by bending. Glue with cyanoacrylate glue and fill the gaps.

Start the painting with a primer. Build the white side of the suit on a light gray base and leave pure white for the crests of the folds. Paint the camouflaged surface in the order base, larger blotches, fine drawing with a thin brush and finally a unifying filter. With a relaxed pose the drawing of the folds is the key thing: let a dark wash run into the recesses and light the edges carefully, and the movement of the fabric will show. Paint the skin separately, with calm transitions and no sharp edges. At the end bring the gloss together with a matte clear coat and dust the lower part of the figure with pigment to match the base.

Who the figure is for

  • Makers of winter dioramas in 1:35
  • Modelers looking for a restful element for a scene with a vehicle
  • Anyone interested in painting folds and camouflage patterns
  • Collectors of resin figures with a fine rendering of detail

The figure is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is a separate figure. The manufacturer offers the multi-figure version separately within the line as a set.

They are two different variants of the stance of the same figure. Judge the difference by the illustration on the packaging of both items; the contents of the package is a separate figure in each case.

Yes, relaxed figures are easily placed into hatches, on a hull or beside a vehicle, where they fill a free area.

Yes. Wash the mold release agent off it, remove the casting blocks and apply a primer, or the paint will hold badly on smooth resin.

Last seen

PANZER ARTFI35-0661:35

1:35 Waffen-SS Anorakanzug at rest No.1

A resting figure in Anorakanzug winter clothing, Waffen-SS uniform, pose No. 1 in 1:35 is a separate resin figure from the maker PANZER ART for a restful winter scene.
In stock
13.96 €
Mark IMKM720-091:720

1:720 K-type Blimp (K-3/6/28) 'Early Production'

A kit of a model of the American K-type non-rigid airship in its early production form, in 1:720 scale.
In stock
14.36 €
CMKF352101:35

1:35 US Special Forces soldier with gun (1 fig.)

1:35 A special forces soldier with a gun (1 figure) is a single CMK resin figure for completing a vehicle or a scene.
In stock
4.60 €
1:48 Messerschmitt Bf-109G6 Wheel set (2) (Tamiya)-25 %Stock ClearanceFavorite
DEF ModelDS480121:48

1:48 Messerschmitt Bf-109G6 Wheel set (2) (Tamiya)

A replacement wheel set for a model of the German Messerschmitt Bf 109G-6 fighter in 1:48 scale, cut to suit the Tamiya kit.
3 left
8.76 €6.56 € You save 2.20 €
New WareNWAM07111:48

1:48 Douglas A-26B-15 Invader EXPERT kabuki masks

1:48 Douglas A-26B-15 Invader EXPERT kabuki masks is an extended masking set in kabuki paper for the A-26B Invader model in 1:48 scale. It is an accessory for painting, not a kit.
In stock
9.56 €
EduardCX7081:72

1:72 F-14 D Tomcat masks for Tamiya

Eduard 1:72 F-14D Tomcat Masks for Tamiya is a set of die-cut masking templates for the Tamiya 1:72 F-14D Tomcat model. It is not an airplane model – the kit is not included in the package.
In stock
9 €
Das WerkDAW350351:35

1:35 Raketenjagdpanzer Jaguar 1 2in1

The plastic kit 1:35 Raketenjagdpanzer Jaguar 1 2in1 captures the tracked tank destroyer of the Bundeswehr armed with anti-tank guided missiles.
In stock
44.76 €
MH modelsMHK350011:35

1:35 Chevrolet G7107 Early front mask

MH models 1:35 Chevrolet G7107 Early front mask is a resin accessory for a model of the American truck - the radiator grille in its early form. It is not a kit of the vehicle but a replacement part for a plastic model.
In stock
5.16 €
1:48 Ilyushin Il-2 Stormovik exhaust stacks-25 %Stock ClearanceFavorite
EduardED6486181:48

1:48 Ilyushin Il-2 Stormovik exhaust stacks

Eduard 1:48 Ilyushin Il-2 Shturmovik exhaust stacks are resin exhaust stacks for a model of the Soviet Il-2 ground attack aircraft in 1:48 scale. It is a replacement for the plastic part from the kit, not a model.
Last one!of 6
6 €4.52 € You save 1.48 €
OmaskOMK748741:48

1:48 I-16 wheel bay plugs (for Eduard)

I-16 wheel bay plugs are foam masking plugs for the wheel bays of Polikarpov I-16 models in 1:48 scale from Omask.
In stock
3.20 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.