1:350 Carley float for 10 people – Type 2 PRINT

Eduard 1:350 Carley float for ten people, type 2 is a 3D printed resin accessory for ship models and dioramas in 1:350 scale. It is not a ship kit but a set of deck equipment.

Scale1:350
Manufacturer Eduard
Product EAN8991111049784

Responsibility details are not available.

6 €
4.96 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Eduard 1:350 Carley float for ten people, type 2, a 3D printed accessory

A 3D printed resin accessory from the Czech manufacturer Eduard for ship models in 1:350 scale. The Carley float is a life raft made up of an oval buoyancy ring with an inner net or grating; it was carried by the vessels of a number of navies and was made in several sizes according to the number of people. This set matches the version for ten people, type 2. It is not a ship model: these are equipment parts added to the deck of a finished kit or to a diorama.

Working and fitting

The parts are made by printing in resin, so they have thin walls and fine internal relief that cannot be cast in injection-molded plastic at this scale. They are cut off the print supports with a sharp cutter, not with pliers, because printed resin is brittle and cracks under pressure. After cutting it is enough to level the pads with very fine sandpaper and to wash the parts. They are bonded with super glue or with a thin glue that cures under light, which flows better into the small contact faces.

Pre-painted parts and painting

Printed resin is supplied in the color of the material and is not pre-painted, so the painting is entirely up to you. It pays to spray the floats off the model, stuck to a wooden stick or to double-sided tape: the buoyancy ring gets its base shade and the inside is then simply darkened with a heavily thinned wash that runs into the relief. Choose the shade to suit the surroundings: on a uniformly painted deck the floats usually blend into the finish around them, while in a diorama it is worth leaving them a shade lighter so that they do not get lost in the whole. Keep the sheen as matte as the rest of the deck. They are glued to the model only after the surrounding area has been sprayed and varnished; fitted beforehand they would break under masking tape.

Who the set is for

  • Builders of ship models in 1:350 scale who are adding deck equipment
  • Makers of dioramas and scenes on a naval theme
  • Modelers with experience of thin-walled printed parts

This is an accessory, not a ship kit. The model, glue and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A life raft with an oval buoyancy ring and an inner net or grating, carried on the decks of warships. It was made in versions by the number of people; this set matches the version for ten people, type 2.

It is not. These are separate equipment parts meant for the deck of a model already built in 1:350 scale or for a diorama.

With a sharp cutter or a fine saw, drawing along the layer. Side cutters compress printed resin and the thin wall cracks.

Spray them off the model on a stick, then darken the inside with a thinned wash. Match the shade and the degree of sheen to the surrounding deck and glue them on only after it has been sprayed.

Last seen

EduardED6530061:350

1:350 Carley float for 10 people – Type 2 PRINT

Eduard 1:350 Carley float for ten people, type 2 is a 3D printed resin accessory for ship models and dioramas in 1:350 scale. It is not a ship kit but a set of deck equipment.
In stock
6 €
Star DecalsSD35-9141:35

1:35 Eastern front 1945 SdKfz 251 Ausf D

Eastern front 1945 SdKfz 251 Ausf D. is a set of waterslide decals in 1:35 from Star Decals with the markings of German SdKfz 251 Ausf. D half-tracks.
In stock
7.16 €
1:32 Douglas Boston Mk.IV SPACE-25 %Stock ClearanceFavorite
EduardED3DL320251:32

1:32 Douglas Boston Mk.IV SPACE

Douglas Boston Mk.IV SPACE in 1:32 scale is a set of 3D decals from the Czech manufacturer Eduard for fitting out the interior. It is not a kit, but an accessory for a model.
3 left
29.80 €22.36 € You save 7.44 €
AiresAIR46961:48

1:48 Panavia Tornado IDS speed brakes

Aires Panavia Tornado IDS speed brakes 1:48 is a resin set of airbrakes for a faithful finish on a model. It is an accessory for a kit, not an aircraft model.
In stock
12.80 €
MAiMMAIM351461:35

1:35 Lärchen Holz Decals

Lärchen Holz decals is a set of water-slide decals imitating larch wood for dioramas and models in 1:35 scale.
In stock
9.56 €
Abrex143ABS-702MY1:43

1:43 Škoda 120L (1984) - Abrex

A finished collector model of the Skoda 120 L of 1984 in blue, 1:43 scale, from the brand Abrex. Nothing has to be glued or painted.
In stock
31.80 €
1:72 CATM-114 Captive Training missile (4 pcs)-25 %Stock ClearanceFavorite
ReskitRS72-03271:72

1:72 CATM-114 Captive Training missile (4 pcs)

1:72 CATM-114 Captive Training missile (4 pieces) is a resin set of four training missiles from Reskit. An accessory of external stores for a helicopter model.
5 left
3.96 €2.96 € You save 1 €
HGWHGW1325191:32

1:32 Hannover Cl.II

HGW 1:32 Hannover Cl.II are fabric seat belts for a model of the German two-seat aircraft of the First World War. It is not a kit but a detail accessory for the cockpit.
In stock
10.48 €
MiniartMA380201:35

1:35 SOVIET TRAM X-SERIES. EARLY TYPE

MiniArt Soviet tram of the X series (type X, early version) 1:35 is an extensive injection-molded plastic kit of the historic two-axle tram, including a diorama base with track. A more demanding model with a great many parts.
In stock
50.36 €
EduardED6483121:48

1:48 F-14A cockpit

A resin cockpit of the F-14A Tomcat in 1:48 scale from the manufacturer Eduard. A detailed replacement of the cockpit of a plastic kit with colored photo-etch and decals. It is not a model of an airplane but an accessory.
In stock
29.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.