A 1:350 wooden deck for the destroyer Z-31 from Artwox Model is a small adhesive veneer set with pre-printed plank laying for the plastic deck of the kit. It is intended for the Dragon 1054 kit.
Responsibility details are not available.
This is not a kit but an accessory. The adhesive wood veneer with pre-printed laying of the deck planks is glued onto the plastic deck of a model of the German destroyer Z-31. The set is cut to the outline of the Dragon 1054 kit, so check the match before you buy.
A plastic deck imitates planks with engraved grooves. Those, however, are in the same plane and the same color as the rest of the part, so they largely disappear once paint is sprayed on and there is nothing for it but to bring them out with a wash. Veneer brings two things plastic cannot offer: the real grain of wood, which changes under the light, and a fine difference in color between the individual planks. It is precisely that slight mismatch of shades that makes the difference between a model and painted plastic when seen from close up. On a smaller ship such as a destroyer the effect is visible immediately as well, because the deck makes up a large part of what is seen of the model from above, and the whole job takes only a little while.
Degrease the plastic and let it dry, pull the film off in sections, line the piece up by the outline and press it down with a soft cloth. Trim overhangs with a fresh blade and unify the surface with matte varnish at the end.
This is an accessory for a plastic kit. The kit itself, glue and paints are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!