1:350 USS Ticonderoga CV-14 (For Trumpeter 05609)

1:350 USS Ticonderoga CV-14 (For Trumpeter 05609)

42.36 €
Add to Cart

1:350 USS Ticonderoga CV-14 (For Trumpeter 05609)

Artwox Model 1:350 USS Ticonderoga CV-14 is a wooden veneer deck with pre-printed plank laying and an adhesive backing that is glued onto the plastic flight deck of the Trumpeter 05609 kit.

Scale1:350
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

42.36 €
35.01 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wooden deck for USS Ticonderoga CV-14 in 1:350 scale

This is not a model of an aircraft carrier but an aftermarket accessory for a plastic kit. The package contains a thin veneer of real wood printed with the laying of the deck planks and with an adhesive layer on the back. The parts are cut to the shape of the Trumpeter 05609 kit, so please check before you buy that you are building exactly that model.

With a flight deck it pays to start from the center

An aircraft carrier has the longest continuous wooden surface of all ship models, and that is exactly why it is the most sensitive to how the deck is laid. If the veneer is laid even slightly askew at the bow, the deviation multiplies along the whole length and by the stern it has become an error you can no longer correct. The proven procedure is to find the centerline, lay the veneer dry first, check that the seams between the planks run parallel with the centerline, and only then glue, from the middle toward both ends and from the centerline out to the sides. The air is driven out with your thumb or a soft cloth toward the edge, never by pressing toward the middle.

Gluing and finishing

Sand the plastic deck with fine paper in advance so that unevenness and mold marks disappear, and degrease it. Take the protective film off the back in sections, not all at once. The finished veneer can be left in its natural tone or lightly unified with thinned wood stain. The recessed seams then only need bringing out with a very thin dark wash, which runs into the grooves by itself. Finally the surface is protected with a thin coat of matte varnish.

Who the set is for

  • Builders of large ship models in 1:350 scale
  • Modelers for whom engraved plastic on a flight deck is not enough
  • Display builds, where the deck is the most visible part
  • Beginners who want a striking effect without etch and resin

The accessory is supplied separately. The kit, paints, varnish and other accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is an accessory for a plastic kit, which has to be bought separately. The set contains only the wooden deck.

The deck is cut for the Trumpeter 05609 kit. Another release may have different flight deck shapes, so check the match before you buy.

Lay it dry first, line the seams up with the centerline of the ship and only then glue from the middle toward the ends. On a long flight deck an initial deviation multiplies toward the stern.

It need not be necessary, but a thin coat of matte varnish protects the wood from getting dirty and unifies the sheen with the plastic around it.

Last seen

Artwox ModelAW100121:350

1:350 USS Ticonderoga CV-14 (For Trumpeter 05609)

Artwox Model 1:350 USS Ticonderoga CV-14 is a wooden veneer deck with pre-printed plank laying and an adhesive backing that is glued onto the plastic flight deck of the Trumpeter 05609 kit.
In stock
42.36 €
1:35 King tiger Kassel ver. PE Set (for Academy 1:35 )-25 %Stock ClearanceFavorite
DEF ModelDE350051:35

1:35 King tiger Kassel ver. PE Set (for Academy 1:35 )

DEF Model, a photo-etched set for the King Tiger, Kassel version in 1:35 scale. Brass photo-etched parts to raise the detail of the German heavy tank. The set is tailored to the Academy kit.
2 leftof 3
12.76 €9.56 € You save 3.20 €
E.T. ModelEA35-1101:35

1:35 British Challenger 2 Main Battle Tank(Desertised) Grilles

Grilles for the desertised Challenger 2 in 1:35 scale from E.T. Model is a photo-etched set of covers for the intake and outlet openings of the engine compartment. An accessory for a model, not a kit of the tank.
In stock
8.76 €
ProedgePE40340

čepel č.154 - řezbářské dlátko tvaru V, 2ks

A Proedge carving chisel No. 154 in a V shape , a package of 2 pieces. A replaceable blade for cutting wedge-shaped grooves and channels.
In stock
2.76 €
HaulerHLP720251:72

1:72 F-55 FEUERLILIE with launching ramp

The F-55 Feuerlilie with a launching ramp 1:72 is a resin kit with photo-etched parts of the German experimental antiaircraft missile, meant for experienced modelers.
In stock
35.16 €
SX-ArtSXA350421:35

1:35 M4A2 Sherman Painting mask (ZVE)

1:35 M4A2 Sherman Painting mask is a set of self-adhesive stencils for spraying the camouflage scheme onto a model of the M4A2 Sherman medium tank in 1:35 scale. These are not canopy masks.
In stock
4.76 €
DK DecalsDK720771:72

1:72 Hurricane Mk.I/SeaHurricane Mk.I P.3

DK Decals 1:72 Hurricane Mk.I and Sea Hurricane Mk.I P.3 is the third decal set in the series for the same subject. It widens the choice of markings beyond what a kit usually holds in the box.
In stock
13.16 €
77propellerPRP7571:72

1:72 US 1000 lb bomb for all kit A-36 Apache and P-51 B/C

1:72 US 1000 lb bomb for all kit A-36 Apache and P-51 B/C is an external bomb for models of American attack and fighter machines in 1:72 scale.
In stock
9.56 €
AberABR352031:35

1:35 Armoured personnel carrier Sd.Kfz. 251/1 Ausf. D - vol.1 - basic set

A basic photo-etched set for a model of the German Sd.Kfz. 251/1 Ausf. D half-track armored personnel carrier in 1:35 scale. The first part of a multi-part range of accessories.
In stock
17 €
ŘOP o.s.F72/1151:72

1:72 Lehký objekt vzor 36 C (bez terénu)

1:72 Light pillbox model 36 C (without terrain) is a model of a Czechoslovak light fortification bunker in 1:72 scale from ROP o.s., supplied without a terrain base.
In stock
8.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.