1:24 Mazda RX7 FD (FEED) is a resin multimedia kit for experienced modelers from the Alpha Model brand. It contains resin castings, photo-etched parts, decals, clear parts and rubber tires.
Responsibility details are not available.
1:24 Mazda RX7 FD (FEED) is a resin multimedia kit for experienced modelers, released by the Alpha Model brand. Besides the resin castings it contains photo-etched parts, decals, clear parts for the glazing and the lights, and rubber tires. It is therefore not classic injection-molded plastic but a set with a more demanding preparation of the parts.
The third-generation Mazda RX-7, factory designation FD3S, was built from the start of the 1990s and is the last RX-7 with a Wankel engine, a two-rotor unit with a pair of turbochargers in a sequential arrangement. The combination of a light body and a rotary engine made it an icon of the Japanese tuning scene. The FEED body conversion comes from a Japanese specialist in exactly these rotary-engined cars.
First wash the parts in warm water with detergent, so that they are rid of the remains of the mold release agent, otherwise the paint will not adhere. Cut off the casting blocks with a saw rather than with pliers and level the surfaces; protect your airways while sanding resin. They are glued with cyanoacrylate glue; ordinary cement for plastic does not work here. It is worth filling the body and sanding it down several times before varnishing, because a gloss finish reveals every unevenness.
The set comes in an unassembled and unpainted state; the package does not contain glue, paints or varnishes.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!