1:400 DKM Ships Utility Rail

Photo-etched ship railings in 1:400 scale for models of Kriegsmarine vessels take the place of the coarse plastic parts of the kit with a fine metal structure.

Scale1:400
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

8.76 €
7.24 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched railings 1:400 for German ships (Artwox Model)

An aftermarket accessory for ship kits, not a model. A universal etched set of railings which, according to the name, follows the type used on Kriegsmarine vessels. The strips are cut to the length needed and glued to the edges of decks, walkways and superstructures.

Why railings get replaced

Railings are the most conspicuous place on a ship model where plastic runs into physical limits. An injected part has to have its stanchions and wires heavy enough to come out of the mold at all, and in 1:400 scale that means a structure several times oversized against reality. Photo-etching solves exactly that: the thickness of the material goes down to tenths of a millimeter, so the railings stop looking massive and the silhouette of the ship becomes finer. The difference can be seen in a photograph of the model, not only close up.

Fitting tips

First remove the original plastic railings from the model and sand the area smooth, or the new etching will not sit down. Always measure the length of the strip with a strip of paper laid along the edge of the deck, and only then cut; etching can be shortened but not lengthened. Make bends on curves gradually in short sections, not in one movement. Hold the strip with tweezers at its foot and glue it with super glue applied with a wooden stick in minute drops; with railings, excess glue can never be hidden. Painting the etching while it is still on the fret and only touching it up with a brush after gluing works well. Fit the railings right at the end, after the hull has been varnished and weathered.

Who the set is for

  • Builders of 1:400 ships who want to get rid of coarse plastic railings.
  • Modelers adding several aftermarket parts to a kit.
  • Those who already have basic experience of gluing photo-etch.
  • Display models judged close up and in profile.

This is an accessory for a ship kit, not a kit on its own. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, this is a universal set. The strips are cut to measure for the deck of the model you use them on.

Yes. Sand the area smooth afterwards as well, or the new etching will not sit down and the joint will show.

Right at the end, after the hull has been varnished and weathered. Railings fitted earlier are easily bent or torn off during further work on the model.

Neither the total length nor the number of strips is given in the name, and it is not stated here.

Last seen

Artwox ModelAW600321:400

1:400 DKM Ships Utility Rail

Photo-etched ship railings in 1:400 scale for models of Kriegsmarine vessels take the place of the coarse plastic parts of the kit with a fine metal structure.
In stock
8.76 €
EduardED170141:400

1:400 RMS Titanic

The photo-etched set Eduard RMS Titanic 1:400 : fine metal parts for refining a model of the liner Titanic in 1:400 scale. It is not a model but an accessory for the Titanic kit (Academy).
In stock
13.80 €
FineMoldsFM319011:350

1:350 IJN Destroyer Yukikaze - Extra Detail-Up Parts Set

An add-on parts set for a model of the Japanese destroyer Yukikaze in 1:350 scale. It extends the detail of the model beyond what is in the box.
In stock
35.16 €
FineMoldsFM779271:700

1:700 IJN Destroyer Yukikaze - Extra Detail-Up Parts Set

An add-on set for a model of the Japanese destroyer Yukikaze in 1:700 scale. It is meant to refine the railings, the masts and the gun armament on a hull barely seventeen centimeters long. Without a kit of the destroyer the set cannot be built.
In stock
33.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.