20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more
1:48 A-26C-15 Invader one-sided mask self-adhesive pre-cutted for ICM

1:48 A-26C-15 Invader one-sided mask self-adhesive pre-cutted for ICM

6.37 €
Add to Cart

1:48 A-26C-15 Invader one-sided mask self-adhesive pre-cutted for ICM

1:48 A-26C-15 Invader, single-sided self-adhesive mask is a pre-cut set of masks for the outer side of the clear parts of a model of the glass-nosed Invader in 1:48 scale. An accessory for a kit, not a model.

Scale1:48
Manufacturer Art Scale
Product EAN8891151000044

Responsibility details are not available.

7.96 € 6.37 €
5.26 € without VAT
−20 % You save 1.59 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Single-sided masking set 1:48 A-26C-15 Invader (Art Scale)

A pre-cut self-adhesive masking set from Art Scale for a model of the Invader in the glass-nosed version, in 1:48 scale. The masks are cut to their final shape along the outlines of the frames, so it is enough to stick them on and spray. The single-sided version covers the outer side of the glazing; the inner edges of the framing are touched in with a brush or stay in the interior color. It is an accessory for a kit; you will not find the model, paints or glue in the box.

Where it pays off most

The glass-nosed version has considerably more divided panes than the attack variant. Hand-cut tape takes hours there and still wrinkles somewhere; a pre-cut mask holds a straight edge and the result is consistent on all the frames.

The real subject

The Douglas Invader was a twin-engine all-metal attack bomber with piston radial engines. The glass-nosed variant had a station in the nose of the fuselage for directing the aircraft onto the target in level bombing, while the attack versions carried fixed gun armament in front. The type served for a number of years after 1945 and was modernized several times, so you will come across very varied finishes and equipment on it.

Applying, spraying and lifting off

Wash the glazing first in lukewarm water with detergent and let it air dry; grease from your fingers is the most common reason a mask does not hold. Take the mask off with tweezers, lay it along the outline of the frame and press the edges down with a blunt toothpick. On broken-up glazing, work pane by pane rather than all at once. Spray thin coats with a pause; spraying the edges with clear varnish before the color reliably seals any leaks. Take the masks off shortly after drying, pulling at an angle along the surface.

Who the set is for

  • Builders of the glass-nosed Invader model in 1:48 scale
  • Modelers who want to avoid hours of cutting tape by hand
  • Beginners who are not yet managing to mask glazing
  • Those who spray with an airbrush and need a sharp, repeatable edge

The box holds masks only. The kit, paints and glue are not included.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, it is a masking set for the clear parts. The model, paints and glue are not included.

The masks cover the outer side of the glazing. The inner edges of the framing are touched in with a brush, or reach for the double-sided variant.

Not reliably. The cut matches the shapes of the particular kit and the particular version given in the name; another variant has different glazing.

Press the edges down carefully, spray several thin coats and spray the edge with clear varnish before the color, which seals it.

Last seen

1:48 A-26C-15 Invader one-sided mask self-adhesive pre-cutted for ICM
-20 %
Favorite
Art ScaleASKM480841:48

1:48 A-26C-15 Invader one-sided mask self-adhesive pre-cutted for ICM

1:48 A-26C-15 Invader, single-sided self-adhesive mask is a pre-cut set of masks for the outer side of the clear parts of a model of the glass-nosed Invader in 1:48 scale. An accessory for a kit, not a model.
In stock
7.96 €6.37 € You save 1.59 €
Mark IDMK144901:144

1:144 North and South Korean AF insignia

North Korean Air Force and Republic of Korea Air Force national insignia (1:144) is a sheet of decals with national insignia for models in 1:144 scale.
In stock
2.36 €
KelikRSK35-00011:35

1:35 KAMAZ 4310 INTERIOR AND EXTERIOR 3D DECALS FOR ANY KIT

Color 3D decals for the interior and exterior of the KAMAZ-4310 truck in 1:35 scale from the manufacturer Kelik. A universal set with no tie to a single kit.
In stock
8.76 €
1:32 Douglas A-26B Invader seatbelts STEEL-24 %Stock ClearanceFavorite
EduardED332591:32

1:32 Douglas A-26B Invader seatbelts STEEL

1:32 Douglas A-26B Invader seatbelts STEEL is an Eduard photo-etched seat harness in 1:32 scale from the STEEL line — pre-painted steel parts, not a mask, not a decal and not a kit.
2 left
3.92 €2.96 € You save 0.96 €
1:48 North-American Mustang Mk.IV LööK-25 %Stock ClearanceFavorite
EduardED6441001:48

1:48 North-American Mustang Mk.IV LööK

1:48 North-American Mustang Mk.IV LööK is an accessory set from the Czech maker Eduard: a colored resin instrument panel and seat belts for the cockpit of a Mustang model in British service, 1:48 scale.
4 leftof 5
7.80 €5.84 € You save 1.96 €
Dead DesignNM480561:48

1:48 Bf.109E-1/Bf.109E-3 National Insignia paint masks

Masking stencils for spraying the national insignia on models of the Bf 109E-1 and Bf 109E-3 in 1:48 scale.
In stock
6.76 €
MASTERAM720011:72

1:72 Browning M2 aircraft .50 caliber (12.7mm) barrels (2pcs)

Turned metal barrels for the Browning M2 .50 caliber (12.7 mm) aircraft machine gun in 1:72 scale (2 pcs) from the Polish maker MASTER. Replacement parts, not a kit.
In stock
4.76 €
AoshimaAO040091:700

1:700 I.J.N. LIGHT CRUISER JINTSU (1942)

A plastic model of the I.J.N. Light Cruiser Jintsu (1942) in 1:700 scale from Aoshima , from the Waterline series. It represents the Japanese Sendai class light cruiser in her 1942 fit.
In stock
19.96 €
Abrex143T-006GW1:43

1:43 Multicar Fumo Sklápěč (2008) - Bílá/Zelená

The Multicar Fumo tipper (2008) in a white and green combination is a finished collector model of a small utility vehicle in 1:43 scale from the Abrex brand. It is not a kit; the model is supplied assembled and painted.
In stock
39.80 €
Solid ScaleSS0460071:16

1:16 TIGER46 Mask for painting "Tiger" stripes

TIGER46 Mask for painting Tiger stripes 1:16 is a set of Solid Scale painting masks for spraying a striped pattern onto large models in 1:16 scale.
In stock
39.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.