1:48 A6M wheels w/ smooth tire

A pair of resin landing gear wheels with a smooth tire for the Japanese Mitsubishi A6M carrier fighter in 1:48 scale. The casting has the contact patch marked out and fine ribbing on the hub.

Scale1:48
Manufacturer Eduard
Product EAN8591111783599

Responsibility details are not available.

6.80 €
5.62 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Zero Wheels with a Smooth Tread

The Mitsubishi A6M, established among modelers as the Zero, entered the Pacific war as a fighter with unusually long range and agility. The designer Jiro Horikoshi pursued that goal by consistently lightening the airframe, which later showed in how little punishment the machine could take in combat. On a number of production batches the landing gear wheels carried tires with no tread pattern, smooth all the way round.

The replacement wheels are cast in resin and have the flattening at the point of contact with the ground suggested, so that once fitted the model does not look as if it were hovering above the surface. The hub carries fine ribbing and a separate boss, and the sidewalls of the tire have a crisp bead and legible relief.

Installation and painting

The castings are separated from the casting block with a saw or the cut of a sharp knife; the remains of the block are usually under the contact patch, so any trace of the cut disappears where the wheel meets the ground. The tire looks good in a dark gray with a touch of brown, and the hub is set apart in a lighter shade according to the production batch. Check the smooth tread against a photograph of the particular machine, because tires with a tread pattern also appeared on this type.

  • 1:48 scale, a resin casting
  • a tire with no tread pattern and a load mark
  • separate relief for the hub and the boss
  • bonded with super glue

The landing gear is one of the places everyone notices on a finished model, because the viewer has it at eye level. Changing the wheels is therefore one of the modifications with the greatest visible effect for the least work.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Not at all. Both forms occurred, smooth and patterned. Before building, it pays to compare a photograph of the machine you are building.

A pair of wheels, that is, both main landing gear wheels. The tailwheel is usually dealt with separately.

Use a fine saw and make the cut where the wheel will rest on the ground once fitted. The remainder is leveled with a file and the trace will not show.

Last seen

EduardED6488081:48

1:48 A6M wheels w/ smooth tire

A pair of resin landing gear wheels with a smooth tire for the Japanese Mitsubishi A6M carrier fighter in 1:48 scale. The casting has the contact patch marked out and fine ribbing on the hub.
In stock
6.80 €
AMMO of Mig JimenezA.MIG-0341

Cobra Motor Satin Black

Cobra Motor Satin Black is a water-thinnable acrylic modeling paint, 30 ml, for car and motorcycle models. A satin black with a medium sheen.
In stock
5.96 €
PmaskPk480581:48

1:48 Fw190A (Arii)

The Pmask 1:48 Fw 190A set brings self-adhesive masks cut for the cockpit glazing of the German radial-engine fighter.
In stock
2.36 €
Firma4949T002/481:48

1:48 Tension wheel for BT-7

1:48 Tension wheel for BT-7 is the idler wheel of the Soviet BT-7 fast tank in 1:48 scale. It is a detail accessory for a model in progress, not a kit of the vehicle.
In stock
5.16 €
RodenRO6021:32

1:32 RAF SE5a (w/Hispano Suiza)

RAF S.E.5a (Hispano-Suiza) is an injection-molded plastic model of the British fighter of the First World War in 1:32 scale from the manufacturer Roden. The model is supplied unassembled and unpainted.
In stock
43.96 €
AiresAIR45501:48

1:48 Yak-38 Forger cockpit set

The cockpit of a model of the Soviet vertical take-off machine is improved by the Yak-38 Forger cockpit set in 1:48 scale from Aires.
In stock
16.80 €
MontexMXK320081:32

1:32 Fw – 190 A 8

Masking sheet for an Fw 190A-8 model in 1:32 scale. It contains glazing masks for both faces and a pair of stencils for the national markings.
In stock
10.76 €
BANON DESIGNBAN014-11

BAN014 light hex head flange bolt 1,1mm

An imitation bolt with a hex head and a collar under the head, size 1.1 mm. An accessory for detailing models of motorcycles and machinery.
In stock
10.36 €
ArmoryARAW483011:48

1:48 T-28 Trojan wheels

A set of resin wheels for the T-28 Trojan trainer in 1:48 scale from Armory. An accessory for building a model that will replace the split plastic landing gear wheels.
In stock
6.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.