1:48 Arctic Camo (+Canopy & Wheels) Paint Mask set for Harrier GR.7/9

1:48 Arctic Camo (+Canopy & Wheels) Paint Mask set for Harrier GR.7/9

29.16 €
Add to Cart

1:48 Arctic Camo (+Canopy & Wheels) Paint Mask set for Harrier GR.7/9

Die-cut self-adhesive masks for the arctic scheme of the British Harrier GR.7/9 in 1:48 scale. The sheet covers the glazing of the cockpit and the tires as well.

Scale1:48
Manufacturer DN Models
Product EAN8591111870955

Responsibility details are not available.

29.16 €
24.10 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A white winter over the northern flank

The BAe Harrier GR.7 was the second generation of the British V/STOL attack aircraft. It was derived from the airframe of the Harrier II and it reached the RAF squadrons at the beginning of the 1990s already as a machine capable of night attack: above the nose it carried a thermal imaging camera and the pilot's compartment was matched to night vision goggles. The later GR.9 version added new avionics and a wider range of precision-guided munitions. On a single type the crews of the air force and of the Fleet Air Arm thus met, and the machines operated from land bases just as from the decks of light aircraft carriers. They left British service in December 2010.

What the sheet contains

The masks are stuck directly onto the surface of the model and the paint is sprayed over them. Winter coats have a sharp, broken-up boundary between the dark ground and the white fields, so tracing the boundary freehand is a lottery: an outline cut in advance replaces it. Besides the camouflage itself the canopy of the cockpit and the tires of the undercarriage are covered too, that is the two places where masking by hand swallows the most time and where paint most often gets blown under it.

A procedure that has proved itself

The ground has to be perfectly cured and free of fingerprints. Press the mask down above all around its perimeter, spray perpendicular to the surface and in thin coats. Uncover rather sooner than later, while the edge is still pliable. The sheet replaces neither the paints nor the kit itself.

Where these machines served

In the last decade of their career the British Harriers appeared over Iraq and over Afghanistan, where they carried out tasks of close air support for ground units. A short takeoff from improvised strips and the ability to hold position gave them a role that classic jet attack aircraft could not manage. The white coats, on the other hand, belonged to exercises in the north of Europe, where the ability to operate from dispersed sites far from concrete runways was tested.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For 1:48 scale. The outlines are cut to the dimensions of the airframe of the Harrier GR.7 and GR.9 in this size.

No. Only the sheet of masks is supplied. The kit and the spraying paints have to be obtained separately.

It covers both. Alongside the camouflage fields it holds parts for the glazing of the pilot's compartment and for the tires.

Shortly after the last coat has dried, while the edge of the paint is still soft. An over-dried coat tears away more easily when being peeled off.

Last seen

DN ModelsDN48/827-0161:48

1:48 Arctic Camo (+Canopy & Wheels) Paint Mask set for Harrier GR.7/9

Die-cut self-adhesive masks for the arctic scheme of the British Harrier GR.7/9 in 1:48 scale. The sheet covers the glazing of the cockpit and the tires as well.
In stock
29.16 €
Kits-WorldKW3D17210381:72

1:72 Bae Hawk T1 - 3D Full colour Instrument Panels (for Airfix kits)

3D full color instrument panel decals for the BAe Hawk T1 (1:72) from Kits-World for faithful cockpit detail.
In stock
11.16 €
ReskitRS48-04151:48

1:48 SUU-11B/A Minigun pod 7,62mm (1 pcs)

Reskit 1:48 SUU-11B/A Minigun pod 7.62 mm is a 3D-printed resin gun pod with a rotary machine gun for models of combat aircraft.
In stock
9.16 €
Hobby BossHB838301:35

1:35 US GMC CCKW 750 galon Tanker

Hobby Boss 1:35 US GMC CCKW 750 gallon tanker is an injection-molded plastic kit of the American 6x6 truck in its fuel tanker form.
In stock
39.96 €
3DF3DF1048601:48

1:48 ammunition belt 13X64b for MG 131

A 13 mm ammunition belt for the MG 131 machine gun in 1:48 scale from 3DF is a detail accessory for the open gun bays of German aircraft.
In stock
8.76 €
AML DecalsAMLC720121:72

1:72 Decals Bristol Beaufighter IF&VIF Part IV.

Bristol Beaufighter IF and VIF decals Part IV 1:72 is a set of waterslide decals from the maker AML in 1:72 scale for models of the British twin-engine Beaufighter heavy fighter.
In stock
4.76 €
ZvezdaZV80291:72

1:72 Samurai Army Headquarters XVI-XVII centuries AD

A set of unpainted figures in 1:72 scale: the command post of a Japanese samurai army of the sixteenth and seventeenth centuries.
In stock
13.56 €
BARRELS & BOXES – SCENOGRAPHY WARGAME SET -100% POLYURETHANE RESIN COMPATIBLE WITH 30-35MM SCALE-25 %Stock ClearanceFavorite
AK interactiveAK1366

BARRELS & BOXES – SCENOGRAPHY WARGAME SET -100% POLYURETHANE RESIN COMPATIBLE WITH 30-35MM SCALE

A set of barrels and boxes for gaming terrain from AK Interactive: scenography accessories in polyurethane resin for figures 30 to 35 mm tall.
Last one!of 3
12.76 €9.56 € You save 3.20 €
ARK ModelARK350331:35

1:35 Russian heavy tank KV-1 mod. 1941 (last)

The ARK Model 1:35 KV-1 mod. 1941 (last) is an injection-molded plastic kit of the Soviet heavy tank of the Second World War in the late production form. It is supplied unassembled and unpainted.
In stock
21.96 €
XtradecalX482261:48

1:48 de Havilland Chipmunk In Civil Hands

Markings of Chipmunks in civilian hands for 1:48 scale – registration marks, flying club combinations and aerobatic finishes.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.