The TFace masking set for the Bell AH-1G Cobra in 1:48 scale from the Czech maker Eduard contains die-cut masks for the outside as well as the inside of the glazing.
Responsibility details are not available.
This is not a kit but a masking set in the TFace version. The masks are prepared for both sides of the glazing, that is separately for the outside and separately for the inside of the cockpit. You can therefore spray the frame from both sides and the glass stays clean.
The cockpit of the AH-1G is narrow and the crew sits in tandem, so there is a view into the space from the side as well as from above. The inner side of the frame is therefore in view together with the outside, and if masking is done only from outside, the inside stays in the color of the clear plastic. On a finished model that looks like unfinished work even though everything else is sprayed correctly. The TFace set deals with that difference without your having to cut a second set of masks by hand.
Work one side at a time. First stick down and spray the inner masks in the interior color, let them dry thoroughly and only then move on to the outside. Degrease the glazing before each step. Press the masks down along their whole edge, above all in the corners. Apply the paint in thin coats, because a heavy coat creeps under and makes a step. Peel the mask off while the paint has only just dried. Glue clear parts with a glue for glazing, as ordinary cement for plastic can fog the glass.
This is an accessory for a plastic kit. The model, paints and glue are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
