1:48 Bell P-39/P-400 Airacobra TFace

Eduard 1:48 Bell P-39/P-400 Airacobra TFace is a double-sided mask set for a model of this fighter in 1:48 scale. It contains masks for the outer and the inner side of the glazing; it is neither a kit nor a photo-etched set.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

10.40 €
8.60 € without VAT
4 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Double-sided TFace masks for the P-39/P-400 Airacobra in 1:48 scale

Die-cut self-adhesive masks from the Czech manufacturer Eduard. First a word on the kind of product: the package contains masking stencils for finishing a model. They are not metal photo-etched parts and it is not a kit, which has to be bought separately.

Why precisely on the Airacobra

The Airacobra had an unusually arranged cockpit. Instead of a sliding canopy it was entered through side doors of automobile type, which had glazing of their own. There are therefore more glazed areas with frames than is usual on a fighter, and they are clearly visible both from the side and from the inside. That is exactly why the double-sided TFace set pays off on this type: the inner masks let you paint the frames from the inside in the interior shade, the outer ones then take the camouflage scheme on the outside.

The real subject

The Bell P-39 Airacobra was an American fighter with an unusual layout: the engine was placed behind the pilot's cockpit and drove the propeller through a long shaft led under the floor. The aircraft also had a nosewheel landing gear, which was not usual on fighters at the time it appeared. The designation P-400 was carried by the export version originally ordered for Britain, which differed in armament. The type was used in large numbers above all on the Eastern Front, where it suited operations at low and medium altitudes.

Use

Apply the inner masks to the glazing parts before you fit them and spray the interior shade. Only then set the glass in and add the outer masks. Work patiently on the door windows; they are small and the frames tend to be narrow. Apply the paint in thin coats and remove the mask while the finish is fresh. The set is cut for a particular kit of this type; please check compatibility.

Who the set is for

  • builders of the P-39 or P-400 in 1:48 scale
  • modelers who want the frames correct when seen from the inside too
  • anyone interested in clean edges without masking by hand with tape
  • modelers who finish models with an airbrush

This is an accessory for a model, not a kit. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

P-400 was the designation of the export version originally ordered for Britain, which differed in armament from the standard P-39.

The set contains masks for the outer and the inner side of the glazing, so the frames can be in the interior color on the inside and in the camouflage scheme on the outside.

No. The package contains only masking stencils. The kit has to be obtained separately.

Kabuki masking paper has a moderate tack and, if it is taken off gently at a sharp angle, it does not pull the finish away. The surface should be well cured before masking, though.

Last seen

EduardEX7021:48

1:48 Bell P-39/P-400 Airacobra TFace

Eduard 1:48 Bell P-39/P-400 Airacobra TFace is a double-sided mask set for a model of this fighter in 1:48 scale. It contains masks for the outer and the inner side of the glazing; it is neither a kit nor a photo-etched set.
In stock
10.40 €
DragonDR62901:35

1:35 Pz.Kpfw. 38(t) Ausf. G w/Interior

An injection-molded plastic kit of the Pz.Kpfw.38(t) Ausf.G with interior in 1:35 scale from Dragon — a light tank in German service with a fully broken-down inside.
In stock
47.96 €
1:32 D-704 Buddy air refueling store (early) (1 pcs)-25 %Stock ClearanceFavorite
ReskitRSU32-01461:32

1:32 D-704 Buddy air refueling store (early) (1 pcs)

1:32 D-704 Buddy air refueling store (early) is an accessory representing an external pod for refueling in flight, in its early form.
4 leftof 5
18.36 €13.76 € You save 4.60 €
ŘOP o.s.S700/0081:700

1:700 Destroyer Z 28 Germany 1943

The destroyer Z 28 in 1:700 scale as she was in 1943, that is, after the refit with which the vessel returned to northern waters.
In stock
34.36 €
TrumpeterTR022831:32

1:32 RAF Mustang III (P-51B/C)

The injection-molded plastic kit RAF Mustang III (P-51B/C) in 1:32 scale from Trumpeter — a large, detailed model of the Allied long-range fighter.
In stock
26.76 €
Quinta StudioQP320051:32

1:32 Wooden propellers Axial Wolff (Roden)

Decals with the texture of Axial and Wolff wooden propellers in 1:32 scale from Quinta Studio. A printed imitation of laminated wood for the propeller blades of First World War aircraft models. The set is intended for the Roden kit.
In stock
5.16 €
DN ModelsDN32/827-0781:32

1:32 F-15 Eagle Camouflage Paint Masks Set

Camouflage masks for the McDonnell Douglas F-15 Eagle fighter in the large 1:32 scale. The cut film delimits the areas of the individual shades.
In stock
31.96 €
KelikRSK72-01351:72

1:72 AVRO VULCAN B.2 Front cockpit - interior 3D decals for Airfix kit

Avro Vulcan B.2: front cockpit, interior 3D decals 1:72 from Kelik for a color rendering of the pilot's cockpit of the British bomber. The set is intended for the Airfix kit.
In stock
14.76 €
ReskitRSU48-01261:48

1:48 Tail Rotor for the Mil Mi-24V/VP

Tail Rotor for the Mil Mi-24V/VP 1:48 (Reskit) is a resin, 3D-printed tail rotor for the Mi-24V/VP attack helicopter. It is an accessory, not a model in its own right, and it calls for a base kit.
In stock
15.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.