Masking stencils for the national insignia and other markings of an F-35B Lightning II model in 1:48 scale. According to the name they are cut for Tamiya kits.
Responsibility details are not available.
A set of masking stencils for the national insignia and other markings of an F-35B Lightning II model in 1:48 scale. The name gives Tamiya kits as what it is meant for. With it the markings are not applied but sprayed.
A decal carries a film that shows through easily on a matte finish as a glossy outline. On today's low-visibility machines that is doubly conspicuous, because the real insignia are sprayed on the aircraft and differ from the finish around them only in shade. A stencil removes the film completely: the insignia is created out of paint, it settles into panel seams and the surface under it stays matte.
The set is used only on a finished and dried base coat. Seat the stencil in place, press the edges down with a blunt tip and cover the surroundings so that no mist drifts over. Apply the paint square to the surface, in thin coats and rather in two goes; a heavy coat creeps under the edge and the insignia blurs. Take the stencil off while the coat has not yet fully cured.
For modelers who build the F-35B in 1:48 scale and want the markings sprayed, not applied. Check the placement of the insignia on a particular version beforehand in the kit instructions. The kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
