1:48 HAWKER HURRICANE ROUNDELS AND FIN FLASHES - LATE

1:48 HAWKER HURRICANE ROUNDELS AND FIN FLASHES - LATE

4.36 €
Add to Cart

1:48 HAWKER HURRICANE ROUNDELS AND FIN FLASHES - LATE

A masking sheet for late British insignia on Hurricane models in 1:48 scale.

Scale1:48
Manufacturer Model Maker
Product EAN9991111991823

Responsibility details are not available.

4.36 €
3.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The Hurricane in the attack role

While the Spitfire stayed a fighter to the end of the war, the Hurricane changed direction. Versions with twelve machine guns, with four 20 mm cannons or with bombs and rockets slung beneath attacked ground targets from the Tunisian coast to the Burmese jungle. The robust tubular frame took the field strips on which a more delicate airframe would not have lasted long, and its ease of repair was famous among the mechanics.

Machines from these theaters already carried late-pattern markings with a narrow white ring. On some fronts the circles on the upper wing surfaces were also reduced or left off entirely, so that the aircraft would not stand out so much against parched terrain. A modeler can therefore choose how many insignia to transfer onto the airframe at all, and move the build toward one particular theater by doing so.

The die-cut films for 1:48 scale make such a choice easier. You stick down only what the machine really carried, and the rest of the sheet stays in the box for next time, because nothing is soaked and nothing is in a hurry.

When spraying, watch the air pressure. Low pressure with denser paint will not get under the edge of the film, whereas heavily thinned paint at high pressure runs under and the edge blurs into nothing. A test spray on an offcut of plastic works out cheaper than sanding back a finished wing.

Anyone building a desert machine should count on sand base color covering differently from European green. The blue of the circle shows through a light base more easily and one extra coat tends to be necessary. That can be checked on a piece of scrap plastic painted in the same shade as the airframe, which is five minutes' work and saves repainting a finished fuselage side.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

You do not. The unused shapes stay on the backing and will serve on the next build.

Medium, with slightly denser paint. Heavily thinned paint at high pressure runs under the edge.

Machines from the second half of the war, that is North Africa, the Mediterranean and the Far East.

Yes, mainly in the width of the rings and the size of the field on the vertical tail.

Last seen

Model MakerMM-IM487041:48

1:48 HAWKER HURRICANE ROUNDELS AND FIN FLASHES - LATE

A masking sheet for late British insignia on Hurricane models in 1:48 scale.
In stock
4.36 €
SBS ModelSBS720831:72

1:72 SBD-1/2/3/4 Dauntless engine & oil cooler with exhaust

SBS Model 1:72 — SBD Dauntless engine with oil cooler and exhausts is a 3D-printed resin replacement for the powerplant.
In stock
10.76 €
IBG modelsIBG72U0491:72

1:72 I.A.R. 80/81C Wheels Groove Pattern (used from 1942) (3D-Printed)

Wheels with a groove pattern for the I.A.R. 80/81C (from 1942) in 1:72 scale are a 3D-printed resin accessory set from IBG with a lengthwise grooved tread.
In stock
4.76 €
Quinta StudioQDS483331:48

1:48 Avro Anson Mk.I 3D-Printed & coloured Interior on decal paper (Airfix) (Small version)

Quinta Studio 1:48 Avro Anson Mk.I is a 3D printed colored interior set on decal paper that brings the cockpit of a model to life quickly and without painting. The set is made for the Airfix kit.
In stock
10.36 €
1:32 Republic F-105F/G Thunderchief wheels set-25 %Stock ClearanceFavorite
ReskitRS32-00771:32

1:32 Republic F-105F/G Thunderchief wheels set

The 1:32 Republic F-105F/G Thunderchief wheels set is a resin set of landing gear wheels for a model of the two-seat Republic F-105F and F-105G in 1:32 scale from the manufacturer Reskit.
2 leftof 4
13.96 €10.48 € You save 3.48 €
GINGER CATGCAT-350031:35

1:35 Flak38 and KwK38 2cm Guns Muzzle Brake (5pcs)

Flak 38 and KwK 38 muzzle parts, 1:35, 5 pcs — a 3D-printed resin accessory from GINGER CAT.
In stock
5.16 €
PeewitPW1430011:144

1:144 Beaufighter Mk.I/VI

Peewit painting masks for the Bristol Beaufighter Mk.I/VI in 1:144 scale: self-adhesive masks for painting the canopy frames cleanly.
In stock
3.96 €
ReskitRS72-00701:72

1:72 General Dynamics F-111E,F & EF-111 wheels set

Reskit wheels for the F-111E,F and EF-111 1:72 is a resin set of landing gear wheels for models of the General Dynamics F-111 (E and F versions) and the EF-111. It is an accessory, not a model in its own right.
In stock
8.36 €
ReskitRS48-01991:48

1:48 Douglas F4D-1 Skyray Type 2

1:48 Douglas F4D-1 Skyray Type 2 — a Reskit resin wheel set for a more faithful landing gear on F4D-1 Skyray models. It is not a model of an aircraft but an accessory for building one.
In stock
7.16 €
PeewitPWM1440291:144

1:144 Avro Vulcan B.2

Masks for the Avro Vulcan B.2 in 1:144 scale (Peewit) are die-cut self-adhesive templates for the glazing. It is not a kit.
In stock
3.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.