Víkendové slevy -20 %! | Weekend Sale – 20% OFF! | MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO

1:48 Ilyushin IL-2 Sturmovik TFace

Eduard 1:48 Ilyushin Il-2 Shturmovik TFace is a double-sided mask set for a model of this ground-attack aircraft in 1:48 scale. It contains masks for the outer and the inner side of the glazing; it is neither a kit nor photo-etched parts.

Scale1:48
Manufacturer Eduard
Product EAN8591111000000

Responsibility details are not available.

10.40 € 8.32 €
6.88 € without VAT
−20 % You save 2.08 €
Out of stock – can be reserved
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Double-sided TFace masks for the Il-2 Shturmovik in 1:48 scale

Die-cut self-adhesive masks from the Czech manufacturer Eduard. First, the kind of product straight out: the package contains stencils for masking while finishing a model. It is not a photo-etched set with metal parts, nor a kit — the model is bought separately.

What TFace does

The abbreviation TFace means that the set deals with the glazing from both sides. You apply the inner masks to the cockpit parts before fitting them and spray the interior shade; the outer masks are then used when spraying the camouflage scheme. The result is frames that have the right color both inside and outside. Single-sided sets deal only with the outside.

The real subject

The Ilyushin Il-2 was a Soviet ground-attack aircraft intended for attacks on ground targets. Its main design feature was the armored bathtub, which formed the load-bearing part of the front half of the fuselage and protected the engine, the radiators and the pilot. It was built in single-seat and two-seat versions with a gunner in the rear cockpit. It is among the most numerously built combat aircraft of its day. What matters for the modeler is that the cockpit has heavy framing and an armored windshield, so the frames are prominent on a model and a clean job on them is very visible.

Use

Degrease the glazing, apply the inner masks before fitting the parts and press the edges down with a blunt tip. Once the interior is sprayed, set the glass in and add the outer set. Apply the paint in several thin coats; a single heavy coat is easily pushed under the edge of the mask. Take the mask off at a sharp angle while the finish is still fresh. The set is cut for a particular kit of this type; please check compatibility beforehand.

Who the set is for

  • builders of the Il-2 in 1:48 scale
  • modelers who are bothered by frames in the wrong color when seen from the inside
  • anyone interested in quick and even masking
  • modelers who finish models with an airbrush

This is an accessory for a model, not a kit. The model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It lets you spray the cockpit frames from the inside in the interior shade. Without it the frames would show through in the color of the outer finish, which is noticeable when looking into the cockpit.

No. It is a set of masking stencils for finishing a model of the Il-2 in 1:48 scale. The kit has to be bought separately.

The masks are cut for a particular kit and a particular version. Please check compatibility with the model you are building beforehand.

It is a double-sided TFace set in 1:48 scale. The number of masks is given in the manufacturer's instructions.

Last seen

1:72 HFB-320 Hansa Jet 'Charter Express'-25 %Stock ClearanceFavorite
AmodelAMOD723651:72

1:72 HFB-320 Hansa Jet 'Charter Express'

HFB-320 Hansa Jet Charter Express is a plastic kit of the German business jet in 1:72 from the maker Amodel. It is supplied unassembled and unpainted.
2 leftof 3
33.96 €25.48 € You save 8.48 €
PlusmodelPMO547

Olověné drátky 0,6 mm dlouhé

Plusmodel lead wires 0.6 mm long are round lead wires 0.6 mm in diameter in the long version, suitable for heavier hoses and piping on models.
In stock
5.72 €
TamiyaTA80010

X-10 Gun Metal (Enamel)

Tamiya X-10 Gun Metal (Enamel) is a metallic enamel modeling paint in the gun metal shade, 10 ml, for painting with a brush as well as an airbrush.
In stock
1.56 €
AiresAIR45551:48

1:48 F-105G Thunderchief cockpit set

Replacement cockpit equipment for a 1:48 model of the F-105G Thunderchief. This accessory set replaces the cockpit supplied with the kit.
In stock
39.20 €
AMTAMT12761:32

1:32 Star Wars: Phantom Menace Anakin's Podracer

AMT Star Wars: The Phantom Menace, Anakin's Podracer (1:32) is a plastic kit of the famous racing machine from Episode I.
In stock
57.96 €
Green Stuff WorldGSW7590

7x Mix 16mm Dice - Clear Orange/Green

7x Mix 16mm Dice - Clear Orange/Green is a seven-piece set of gaming dice 16 mm in size in a transparent build, in orange and green. The designation Mix means that the set brings together dice of different types.
In stock
6.36 €
1:32 P40-N INTERIOR 3D DECALS FOR TRUMPETER KIT
-20 %
Favorite
KelikRSK32-00021:32

1:32 P40-N INTERIOR 3D DECALS FOR TRUMPETER KIT

Color interior elements from the brand Kelik with a three-dimensional relief for a model of the Curtiss P-40N in 1:32 scale, according to the name laid out for the Trumpeter kit.
In stock
13.16 €10.53 € You save 2.63 €
FlyhawkFH11061:700

1:700 USS Ward DD-139 1941

Flyhawk 1:700 USS Ward DD-139 (1941) is a detailed injection-molded plastic kit of the American Wickes class destroyer.
In stock
19.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.