M.B. Mk 4BS ejection seat for the F3H-2 Demon 1:48 (Aires) is a resin detail set of a seat for a model of the American McDonnell F3H-2 Demon carrier fighter. It is not a model, but an accessory.
Responsibility details are not available.
A resin detail set in 1:48 scale for more experienced modelers. It is not an airplane model, but an accessory: a faithfully cast Martin-Baker Mk 4BS ejection seat for the late version of the American McDonnell F3H-2 Demon carrier fighter. The set replaces the simplified plastic seat on the base kit.
The F3H-2 Demon was an American single-seat carrier fighter of the 1950s operated by the Navy. Its late version used a British Martin-Baker ejection seat of the Mk 4 series. The seat is clearly visible in an open or glazed cockpit, so a resin casting with its fine rendering of the frame, the padding and the harness raises the realism of the cockpit far above a bare plastic part.
Before gluing, wash the part free of mold release residue, carefully cut off the casting block and sand the surfaces; protect your airways when sanding resin. Glue the resin with cyanoacrylate glue. Bring out the harness and the details with paint and a fine wash. Try the fit in the cockpit dry. Paints and glue are not included in the package.
This is a resin detail set for more experienced modelers, not a complete model. A matching base kit is needed to use it; paints, glue and other accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
