1:48 Mi-35M 3D-Printed & coloured Interior on decal paper (Zvezda) (Small version)

1:48 Mi-35M 3D-Printed & coloured Interior on decal paper (Zvezda) (Small version)

11.96 €
Add to Cart

1:48 Mi-35M 3D-Printed & coloured Interior on decal paper (Zvezda) (Small version)

Three-dimensional colored interior decals for the Mil Mi-35M attack helicopter in 1:48 scale from Quinta Studio, the smaller variant of the set. An accessory for a kit, not a model of the helicopter. Target kit: Zvezda.

Scale1:48
Manufacturer Quinta Studio
Product EAN6591111008800

Responsibility details are not available.

15.96 € 11.96 €
9.88 € without VAT
−25 % You save 4 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Three-dimensional interior decals for the Mi-35M 1:48 (Quinta Studio, the smaller variant)

The Quinta Studio set brings raised, straight away painted interior elements printed on decal paper. They are stuck directly onto the parts of a plastic kit and replace drawn-out painting of instruments and panels. It is not a kit of the helicopter but an accessory for a modeler. It is the smaller variant of the set, that is a narrower selection of elements than in the full version. Check the exact contents of the package on the packaging. The decals are shaped for the parts of the Zvezda kit.

The real subject

The Mi-35M is a modernized export version of the attack helicopter of the Mi-24 series. Compared with the older machines it has a shortened wing, fixed landing gear and modernized avionics including equipment for flying at night. The design keeps the characteristic arrangement of two cockpits one above the other — the weapons systems operator sits at the front, with the pilot behind and above him — and at the rear of the fuselage there is space for carrying soldiers. There are therefore two cockpits, and in 1:48 scale you can see well into both through the glazing.

Application tips

The application differs from classic wet decals, so go by the instructions enclosed in the package. First degrease the interior parts, spray them with a base color and let it cure fully. Transfer the elements with sharp tweezers and seat them at the first attempt. A decal softener and a setting solution do not belong here, as they would attack the printed resin. It pays to offer them up dry first and check how they fit. On a helicopter, do not forget that you fit and finish the interior before closing the fuselage up and glazing the cockpits.

Who the set is for

  • Modelers of helicopters who want legible instruments without painting by hand
  • Builders who plan a model with a clearly visible cockpit
  • Anyone interested in a quicker alternative to photo-etched sets
  • Collectors of modern aviation equipment in 1:48 scale

The package holds decals only. The kit, paints and glue are not part of it.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is only a set of decals for the interior, and you obtain the plastic model separately.

The Mi-35M has two cockpits one above the other. Check the particular extent of the elements the set covers against the manufacturer's data on the packaging.

Before the fuselage is closed up and the cockpits glazed. Once it has been glued together you can no longer reach the parts.

The smaller variant holds a narrower selection of elements, while the full set covers the interior more broadly.

It is intended for the Zvezda kit.

Last seen

1:48 Mi-35M 3D-Printed & coloured Interior on decal paper (Zvezda) (Small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS482951:48

1:48 Mi-35M 3D-Printed & coloured Interior on decal paper (Zvezda) (Small version)

Three-dimensional colored interior decals for the Mil Mi-35M attack helicopter in 1:48 scale from Quinta Studio, the smaller variant of the set. An accessory for a kit, not a model of the helicopter. Target kit: Zvezda.
8 leftof 9
15.96 €11.96 € You save 4 €
LifecolorLIFUA911

UA911 - East Europe dust

Lifecolor East Europe Dust is a water-thinnable matte acrylic paint in an East European dust shade for a faithful dusting of models.
In stock
2.76 €
E.T. ModelE35-0361:35

1:35 Chinese PLA ZSL-92B IFV

A photo-etched set for a model of the Chinese ZSL-92B wheeled infantry fighting vehicle in 1:35 scale from E.T. Model. Thin metal parts replace the plastic fenders, grilles and brackets.
In stock
15.96 €
Model SceneVG7-0361:45

1:45/1:72 Přízemní paltma Asie

Asian ground palm 1:45/1:72 is a scenery accessory for dioramas – laser-cut low Asian palm plants in colored paper for smaller scales.
In stock
5.16 €
OmaskOMK640101:48

1:48 Bf Fw 190 D masks for control surfaces (for Eduard)

Painting masks for the control surfaces of the Fw 190 D 1:48 are precisely shaped masks from Omask for easy, clean painting of the rudder, elevators and flaps of the model.
In stock
7.96 €
Black Dog modelBDP350011:35

1:35 WW I Allies Propaganda posters (24 posters)

1:35 period Allied posters of the First World War, 24 pieces are printed paper sheets with miniature posters for finishing a diorama. It is not a resin casting.
In stock
5.56 €
ArmoryARM722111:72

1:72 T-18 (MS-1) - Soviet 1st Serial Light Tank

A kit of the Soviet T-18 (MS-1) light tank in 1:72 scale from Armory. A model of the first series-built tank of Soviet design.
In stock
31.56 €
EduardFE11681:48

1:48 Junkers Ju-88C-6b Night Fighter

Eduard 1:48 Junkers Ju-88C-6b Night Fighter photo-etched set is a photo-etched accessory for the model of the twin-engined Ju-88 in the night fighter version. It is a set of metal details, not a kit.
In stock
13 €
Aires/QuickboostQB725311:72

1:72 Heinkel He 111P-2 gun barrels

Quickboost gun barrels for the Heinkel He 111P-2 in 1:72 scale. A resin replacement for the barrels from Aires for truer detail of the defensive armament.
In stock
6.36 €
EduardED6489741:48

1:48 F-16C wheel bays early 3D-Printed

F-16C landing gear bays (early, PRINT) in 1:48 scale from Eduard is a 3D-printed detail set for experienced modelers, not an aircraft model.
In stock
27 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.