1:48 P-47D Thunderbolt (for Tamiya kit)

1:48 P-47D Thunderbolt from Red Fox Studio is a set of 3D textured instrument panels and seat belts on decal paper. An accessory for the cockpit of the Tamiya kit, not a model of an aircraft.

Scale1:48
Manufacturer Red Fox Studio
Product EAN8591111000000

Responsibility details are not available.

15.56 €
12.86 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:48 P-47D Thunderbolt — 3D decals for the cockpit (Red Fox Studio)

The set brings three-dimensionally printed instrument panels, side consoles and seat belts into the cockpit of a Thunderbolt in 1:48 scale. Everything is on decal paper, so nothing is cut and nothing is glued — the parts are soaked off and positioned like ordinary decals. This is not a model of an aircraft but an accessory for the interior of the Tamiya kit.

What makes this cockpit special

The Thunderbolt had an unusually roomy cockpit by the standards of its day and its equipment matches. The most characteristic part is the left control console: side by side here lie the levers for the throttle, the propeller and the turbocharger controls, which other single-engine fighters of the period do not have. To that belong the instruments monitoring the work of the turbocharger, which fill the panel up more than on lighter types. The seat is wide, with prominently routed shoulder and lap belts. Because the cockpit is physically large, once the canopy is removed or slid back you really can see deep inside — flat plastic panels hit the eye there more than on smaller machines.

How the set is applied

Paint the area under the decal, let it dry and, if need be, polish it with varnish so that the base is smooth. Soak the part in lukewarm water, move it into place and press it down with a soft brush or a cotton swab. Sand the engraved detail in the plastic flat beforehand. Apply decal softener by drops and do not run anything across a decal that is still damp, so that the layered print does not wrinkle.

Who the set is for

  • For builders of a Thunderbolt with an open cockpit
  • For modelers who want legible gauges without hand painting
  • For those who are bothered by empty side consoles from the mold
  • For modelers who prefer a decal to a photo-etched part

The accessory is supplied without a kit, paints or glue. Check before ordering that you are building the Tamiya kit.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

In the visible result, yes. The print has a layered structure, so the gauges and switches are not flat, and application is at the same time simpler than with a photo-etched part.

It is recommended to sand the raised engraving away so that the decal seats over its whole area. Otherwise bubbles and lifting edges are a risk.

Yes. It is handled like ordinary decals, so cutting, bending and gluing small metal parts are all done away with.

Last seen

Red Fox StudioRFSQS-480931:48

1:48 P-47D Thunderbolt (for Tamiya kit)

1:48 P-47D Thunderbolt from Red Fox Studio is a set of 3D textured instrument panels and seat belts on decal paper. An accessory for the cockpit of the Tamiya kit, not a model of an aircraft.
In stock
15.56 €
Abteilung 502ABTP038

AFRICA EARTH

Abteilung 502 Africa Earth is a dry weathering pigment (a fine colored powder) for weathering models. A warm ocher brown shade of African and desert soil for dust effects. It is not a paint.
In stock
3.96 €
ETA dioramaETA3781:35

1:35 Lebanon - Flags

Lebanese flags 1:35 are a printed paper diorama accessory from ETA Diorama with the flags of Lebanon in 1:35 scale for Middle Eastern scenes.
In stock
3.96 €
Mr.PaintMRP075

KHAKI L-29 DELFÍN

Khaki L-29 Delfin is a Mr.Paint modeling lacquer for an airbrush. The khaki shade of the upper camouflage of the Czechoslovak and Slovak L-29 trainer.
In stock
5.96 €
Aires/QuickboostQB482011:48

1:48 Bf 109F gun barrels

Resin Bf 109F gun barrels in 1:48 scale from Quickboost. A detail accessory for a model, not a stand-alone kit.
In stock
4.76 €
MontexMXK480561:48

1:48 P-51D Mustang

Masking set for the 1:48 North American P-51D Mustang. It masks the cockpit glazing from the outer and the inner face of the frames and adds two sets of stencils for the national insignia.
In stock
11.96 €
RevellRE056781:88

1:88 Slave I-40th Anniversary

1:88 Slave I – 40th Anniversary is a plastic kit of the well-known film ship of a bounty hunter in 1:88 scale, released by Revell for the anniversary of the film.
In stock
49.96 €
Quinta StudioQP480421:48

1:48 DZUS Fasteners (all kits)

Quinta Studio 1:48 DZUS fasteners is a universal colored 3D decal for a faithful rendering of the panel fasteners on the surface of aircraft models.
In stock
3.56 €
BrengunBRL1440941:144

1:144 A-6E vacu canopy (Dragon)

1:144 A-6E: a vacuum-formed canopy is replacement clear glazing for a model of the A-6E carrier attack aircraft in 1:144 scale. It is not a kit but an accessory to the Dragon kit.
In stock
5.16 €
AK interactiveRC813

Maize Yellow RAL 1006 17 ml.

A maize yellow acrylic modeling paint from the Real Colors range by AK Interactive, the manufacturer's part number RC813, a shade to the RAL 1006 standard. A 17 ml bottle.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.