1:48 Supermarine Spitfire Mk.I Markings airbrush mask for Tamiya

1:48 Supermarine Spitfire Mk.I Markings airbrush mask for Tamiya

1:48 Supermarine Spitfire Mk.I Markings airbrush mask for Tamiya

Supermarine Spitfire Mk.I, a painting mask for markings in 1:48 scale from MH models. An accessory for a finished model thanks to which the insignia are applied in paint. Intended for the Tamiya kit.

Scale1:48
Manufacturer MH models
Product EAN8591111000000

Responsibility details are not available.

7 €
5.79 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Supermarine Spitfire Mk.I, a mask for markings 1:48 (MH models)

A painting mask from MH models for 1:48 scale, focused on the markings of the aircraft. It is neither a kit nor a decal sheet but a set of self-adhesive masks. Once they are applied to a varnished surface and sprayed over with paint, the insignia stays permanently in the finish. The target kit is Tamiya.

The real subject

The Supermarine Spitfire Mk.I was the first version in series production of the British fighter with stressed-skin all-metal construction and an elliptical wing. It was powered by a Rolls-Royce Merlin V12 and the landing gear retracted into the wing. The machines changed continuously during production, as early and late examples had a different propeller, canopy shape or exhausts, and that has to be followed when building a particular aircraft.

Dry-fitting and storing the masks

Before you finally apply a mask, lay it down dry, that is, without lifting it from the backing film where that is possible, and check its position against the panel lines and the edges of the surfaces. This dry-fitting reveals most problems before it is too late: a size that does not fit, a different placement from the one your scheme has, and even the fact that one of the insignia was not on that particular machine at all. It also pays to photograph the whole sheet first or to trace its outline, so that after removing individual pieces you know what belongs where. Do not throw unused masks away, because they last a long time on the backing film if you store them flat, in the dark and away from sources of heat. Paper with dried-out adhesive no longer seals on a model and is the main cause of runs with older stock.

Who the set is for

  • Builders of a Spitfire Mk.I model in 1:48 scale
  • Modelers who prefer sprayed markings
  • Anyone interested in accurate work according to particular documentation
  • Airbrush users used to masking small shapes

This set is an accessory for a model, not a kit. The model, paints and varnishes are not supplied with it, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Dry-fitting reveals a size that does not fit and a placement different from the one your scheme has. Once it is applied, a mask is hard to move.

Flat, in the dark and away from sources of heat. Dried-out adhesive is the most common cause of paint running with older stock.

Machines of the Mk.I version differed during production. Compare the masks with the documentation for the particular aircraft you want to build.

No. It is a masking set for a model that has already been built; neither the model itself nor the paints are in the package.

Last seen

MH modelsMHX480401:48

1:48 Supermarine Spitfire Mk.I Markings airbrush mask for Tamiya

Supermarine Spitfire Mk.I, a painting mask for markings in 1:48 scale from MH models. An accessory for a finished model thanks to which the insignia are applied in paint. Intended for the Tamiya kit.
In stock
7 €
1:35 Rangers Landing Craft Assault (LCA) w/Grappling Hook Rocket Launchers-25 %Stock ClearanceFavorite
Gecko Models35GM00901:35

1:35 Rangers Landing Craft Assault (LCA) w/Grappling Hook Rocket Launchers

Gecko Models Rangers Landing Craft Assault (LCA) 1:35 is a plastic kit of the landing craft with rocket launchers for grappling hook lines from Pointe du Hoc.
3 leftof 11
52.76 €39.56 € You save 13.20 €
1:32 P-51D zbraňová šachta, pozdní provedení-25 %Stock ClearanceFavorite
EduardED327211:32

1:32 P-51D zbraňová šachta, pozdní provedení

Eduard 1:32 P-51D gun bay (late form) is a photo-etched set for refining the wing gun bay of a model of the P-51D Mustang fighter.
2 leftof 3
20.80 €15.60 € You save 5.20 €
Voyager ModelPEA1901:35

1:35 Chinese PLA ZBD-04 IFV Track Pins (For All)

Track link pins for the Chinese ZBD-04 infantry fighting vehicle in 1:35 scale are a small Voyager Model add-on set for building link-and-pin tracks: it is not a model and not a complete set of tracks.
In stock
5.16 €
EduardED6724131:72

1:72 P-51D Mustang seat w/ integral belts PRINT

Eduard 1:72 P-51D Mustang Seat with Integral Belts PRINT is a 3D-printed resin pilot's seat with cast-in belts for models of the fighter P-51D Mustang in 1:72 scale.
In stock
4.40 €
Model SceneMSCF713

Pozdní léto - vápencové kameny S

Model Scene Late summer – limestone rocks S is finished growth with small limestone rocks in the drying coloring of the end of summer.
In stock
14.76 €
Arma HobbyAH700591:72

1:72 Description:PSP Airfield WW2 plastic model base 15x15cm + 3D-file for download

A plastic model base measuring 15 x 15 cm in 1:72 scale, its surface reproducing the pierced steel planking of a Second World War field airfield. A 3D print file to download is included.
In stock
7.96 €
FLEX-I-FILEFF321

Náhradní brusné pásy pro rámové brousítko Flex-i-file - výběr

Replacement sanding belts for the Flex-i-file frame sander, an assortment of grits , combine several grits in one package.
In stock
3.96 €
Thunder ModelTH352071:35

1:35 British Scammell Tank Transporter Late Goose Neck

British Scammell Tank Transporter, the late version (Late Goose Neck) in 1:35 scale from the maker Thunder Model: an injection-molded plastic kit of the British tank transporter of the Second World War including the gooseneck semi-trailer.
In stock
43.96 €
Voyager ModelPE357181:35

1:35 Modern South Korea BMP-3 Armored Vehicle Basic (For TRUMPETER 01533)

Brass photo-etch for the BMP-3 infantry fighting vehicle 1:35 (basic set) from Voyager Model. A brass photo-etched detail set to raise the fidelity of the model; it is not a kit of the vehicle but an accessory. Intended for the Trumpeter 01533 kit.
In stock
23.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.