1:48 USAF McDonnell RF-101C Voodoo - Part 1

The McDonnell RF-101C Voodoo 1:48, the first part decal sheet from the manufacturer Caracal Models brings markings for the reconnaissance version of the Voodoo in the service of the US Air Force. The sheet is applied to a finished varnished model and replaces or completes the decals from the box.

Scale1:48
Manufacturer Caracal Models
Product EAN8591111000000

Responsibility details are not available.

17.56 €
14.51 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Decals McDonnell RF-101C Voodoo 1:48, the first part (Caracal Models)

This is a standalone decal sheet in 1:48 scale intended for models of the McDonnell RF-101C Voodoo reconnaissance aircraft. The designation of the first part suggests that the manufacturer divided the subject into several sheets, so a builder can complete the collection of markings with the sheet that follows. The particular machines and schemes are given by the manufacturer on the packaging of the sheet, so compare them before building with the model you have.

The real subject

The RF-101C was the unarmed tactical reconnaissance derivative of the twin-engined F-101 Voodoo fighter aircraft. It differed from the combat version above all in a reworked forward part of the fuselage, into which cameras and their windows fitted. The aircraft was single-seat, two jet engines with afterburners powered it and its domain was fast reconnaissance at low altitude. With the US Air Force it served in the 1960s and it wore a natural metal surface as well as later camouflage finishes.

Application tips

The basis of a successful application is a smooth gloss base. Never lay a decal straight onto matte paint, because air stays under the film and the edges turn white. Spray the finished paint with clear gloss varnish, therefore, let it cure properly and only then work with water. The glossy coat also makes it easier to slide the decal into the right position. Once dry, the whole model can be unified with a matte or semi-gloss varnish. On natural metal the gloss stands out, but it also emphasizes every imperfection beneath it, so it pays to sand the base carefully beforehand.

Who the sheet is for

  • modelers building American jet aircraft of the Cold War in 1:48 scale
  • those interested in reconnaissance specials and their different markings
  • builders who want to replace the decals from the box with better printing
  • collectors who build several machines of one type side by side

This is a standalone decal sheet. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is only a decal sheet, which is applied to a model already built and varnished. The kit, the paints and the glue have to be obtained separately.

The manufacturer divided the subject into several sheets, so this one covers one selection of machines and the sheet that follows brings further ones. Both can be used independently of each other.

Onto a smooth gloss base. Varnish the model with clear gloss varnish first, apply the decals once it has cured and at the end unify the surface with a matte or semi-gloss varnish.

Last seen

Caracal ModelsCAD480731:48

1:48 USAF McDonnell RF-101C Voodoo - Part 1

The McDonnell RF-101C Voodoo 1:48, the first part decal sheet from the manufacturer Caracal Models brings markings for the reconnaissance version of the Voodoo in the service of the US Air Force. The sheet is applied to a finished varnished model and replaces or completes the decals from the box.
In stock
17.56 €
New WareNWAM02091:72

1:72 F/A-18E BASIC kabuki masks

F/A-18E BASIC kabuki masks (1:72) are accurate New Ware painting masks for a Super Hornet model, at the basic level for the canopy glazing.
In stock
3.96 €
TamiyaTA607931:72

1:72 Lockheed Martin F-35B Lightning II

The F-35B Lightning II is an injection-molded plastic kit of the American stealth fighter with vertical landing in 1:72 scale from Tamiya.
In stock
39.96 €
T-Rex StudioTR16003-11:16

1:16 Stug III Sprocket, early version

A resin StuG III drive sprocket in the early form, 1:16 scale — a replacement for the plastic running gear part in a large-scale kit. This is not a model of the vehicle but a separate accessory.
In stock
119.96 €
STRELETS-RSTRM1301:72

1:72 Polish Infantry WWI

Strelets-R 1:72 Polish Infantry WWI is a set of unpainted figures of Polish infantry from the period of the First World War in 1:72 scale, intended for dioramas and scenes.
In stock
9.96 €
QuickwheelQW-0461:35

1:35 T-72 - Zvezda

T-72 wheel masks in 1:35 scale from Quickwheel for painting the rubber tires of the road wheels of the kit from Zvezda.
In stock
9.56 €
BANON DESIGNBAN013-12

BAN013 light arbor bolt 1,2mm

The coarsest grade of the arbor family, 1.2 mm in diameter. It belongs on dominant joints such as the swingarm pivot or the exhaust bracket.
In stock
10.36 €
3B AU/ZB AU – AFV-25 %Stock ClearanceFavorite
AK interactiveAK11387

3B AU/ZB AU – AFV

A modeling paint from the 3rd Generation acrylic range by AK Interactive, with the designation 3B AU/ZB AU, a shade for armored equipment.
2 leftof 3
2.76 €2.08 € You save 0.68 €
1:32 Spitfire Mk.II cockpit-25 %Stock ClearanceFavorite
EduardED6320641:32

1:32 Spitfire Mk.II cockpit

1:32 Spitfire Mk.II cockpit is a resin set of a complete pilot's compartment for the kit of the Supermarine Spitfire Mk.II fighter in 1:32 scale from the manufacturer Eduard.
Last one!of 2
32.80 €24.60 € You save 8.20 €
Border ModelBT-0141:35

1:35 Tiger I initial production 3in1

Tiger I initial production 3in1 is a plastic kit of the Tiger I heavy tank in its initial production standard, 1:35 scale, made by Border Model. The designation 3in1 means that several standards can be built from the box.
In stock
59.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.