Hexagon nuts with rod and washer 1.5 to 2.5 mm from Decalcas: a set of 204 printed fasteners for detailing car models. This is an accessory, not a kit.
Responsibility details are not available.
The set contains 204 miniature hexagon nuts with a through rod and a washer, that is exactly the type of fastening with which mechanical parts, brackets and covers are pulled together on a real car. The elements are made by 3D printing from resin, so they have sharp edges on the hexagon and a legible washer underneath it. It is not a kit and not a replacement part for a particular model but a stock of details that the modeler draws on as needed.
The elements are supplied in five sizes: 42 pieces of 1.5 mm, 42 pieces of 1.75 mm, 40 pieces of 2 mm, 40 pieces of 2.25 mm and 40 pieces of 2.5 mm. The range matches the needs of car and motorcycle models in 1:24 scale, where bolts and nuts are a visible element of the chassis, the engine and the interior.
Cut the parts off their support with a sharp scalpel close to the base, level the surface with a fine file and glue them with super glue, that is cyanoacrylate. The printing is so fine that a heavy coat of primer will rather clog the detail: a thin coat of paint is enough. A metallic look works well over a dark base with light dry brushing. Tweezers with fine tips are a necessity when working with elements this small.
The set is supplied unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
