A set of ten triple blocks 3 mm in dimension. 3D printed for building the rigging of sailing ships in larger scales.
Responsibility details are not available.
Real ship's blocks ran from roughly twenty centimeters on light rigging to more than half a meter on the heaviest halyards. A three-millimeter print therefore stands for a piece around thirty centimeters long in 1:100, or conversely for a massive half-meter block in 1:150. The triple version belonged to the heavier half of the assortment a ship took to sea.
On a model it suits working the lower yards, the sheets of the main sails and the fixed assemblies along the side. Ten pieces in one bag usually cover a whole group of such tie-off points without your having to mix parts from different sources and deal with a difference in the shade of the surface.
The printing captures even the shallow step between the shell and the sheave, which tends to be filled in on cast blocks. If you want it to stand out, run the tip of a scalpel along the groove and, after painting, go over it with a dark wash. The dirt stays in the recess and the block gains depth.
The package holds the blocks only; there is no line or other material in it. Rigging strung on a finished model tends to be the most striking element of all, so it pays to give the small parts more time than the hull itself.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!