A resin kit of the Grumman XF10F-1 Jaguar carrier fighter in 1:48 scale. The single flying prototype of 1952 was the first American aircraft with a variable-sweep wing to get into the air. The parts are glued with cyanoacrylate glue.
Responsibility details are not available.
Grumman worked the XF10F-1 Jaguar up at the end of the 1940s as a carrier fighter for the US Navy. The single airworthy example first left the runway on May 19, 1952 and went down in history as the first American aircraft with a variable sweep angle actually to fly. The angle could be reset roughly between thirteen and forty-two degrees: the spread wing was to tame the approach to a carrier deck, the swept one to allow high speeds.
The weak point turned out to be the Westinghouse J40 engine. It never delivered the promised thrust, it was plagued by failures and several naval programs of the period foundered because of it. The prototype managed about thirty flights, and the trials also revealed trouble with an unusual horizontal tail whose trimming surface moved freely in the airstream. The Navy canceled the order in 1953, the second example under construction stayed unfinished and the Jaguar ended as a dead end. The findings did not go to waste, though; American industry returned to variable geometry a decade later.
The material is casting resin, not injection-molded polystyrene. Before work it is advisable to wash the parts in warm soapy water, because mold release agent from the mold clings to the surface and paint would not hold on it. Cyanoacrylate glue or epoxy will hold the joints; ordinary plastic cement will not work here. Cut the casting blocks off with a saw and never snap them, as resin is brittle and cracks at its thinnest point.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!