29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.
1:700 DKM Tirpitz Wooden Deck w/Masking Sheet & Photoetch for Revell kit 05099

1:700 DKM Tirpitz Wooden Deck w/Masking Sheet & Photoetch for Revell kit 05099

19.16 €
Add to Cart

1:700 DKM Tirpitz Wooden Deck w/Masking Sheet & Photoetch for Revell kit 05099

Artwox Model 1:700 a wooden deck with masks and photo-etched parts for the battleship Tirpitz is a combined accessory set for a plastic kit. The veneer with printed planks and a self-adhesive backing is laid onto the deck of the Revell 05099 kit.

Scale1:700
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

19.16 €
15.83 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A combined set 1:700 for the battleship Tirpitz from Artwox Model

The package combines a wooden veneer deck with the laying of the planks printed on it and a self-adhesive back, a masking template and photo-etched parts. It is neither a ship model nor a substitute for one, but an accessory obtained alongside a kit that has already been bought. The shapes are cut to the Revell 05099 kit and usually will not fit other boxings of the same ship.

Superstructures, hatches and all those cut-outs

The most demanding part of the work is not the large areas but the places where the deck goes around the bases of the turrets, the crane pedestals, the hatches and the feet of the superstructures. It pays to build so that the deck is laid before the superstructures come in turn, otherwise the veneer will hardly get underneath them. Where an overhang is left all the same, trim it with a new scalpel with a fresh blade. A blunt knife does not cut wood but tears it and the grain frays. Cut with several light strokes rather than one forceful one, and lead the blade along the edge of the plastic as along a rule.

Unifying and weathering

Once it is laid, the cuts tend to be a shade lighter than their surroundings. You will level them out with a weak stain or heavily thinned oil paint applied over the whole area. The gaps between the planks then only need going over with a very thin dark wash and the excess pulling away. It can be sealed with a thin coat of matte clear. The resulting deck has an irregular wood grain that you will not achieve on an engraved plastic area with even the best painting.

Who the set is for

  • Modelers who want to take a large surface ship beyond a build from the box
  • Builders who work with a sharp scalpel and are not afraid of fine cuts
  • Those who want to get the deck, the masks and the photo-etched parts in one package
  • Collectors who care about the look of the deck area in a display case

This is not a kit. The base model, paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Before the superstructures go onto the model. Thin veneer gets under finished superstructures with difficulty and there is a risk of breaking it while pressing it in.

A modeling scalpel with a new blade. Several light strokes along the edge of the plastic are better than one forceful cut, which tears the grain.

You do not; the laying of the planks is printed. A stain or a light wash will, however, help to unify the shade and bring out the gaps.

Rely only on the Revell 05099 kit. Various releases differ in the layout of the superstructures and the cut-outs then do not agree.

Last seen

Artwox ModelAM20009A1:700

1:700 DKM Tirpitz Wooden Deck w/Masking Sheet & Photoetch for Revell kit 05099

Artwox Model 1:700 a wooden deck with masks and photo-etched parts for the battleship Tirpitz is a combined accessory set for a plastic kit. The veneer with printed planks and a self-adhesive backing is laid onto the deck of the Revell 05099 kit.
In stock
19.16 €
Plastruct PLT90504

Profil L (1 pcs) H-3,2mm W-3,2mm T-0,8mm L-375mm

Plastruct Profile L (H 3.2 mm, W 3.2 mm, T 0.8 mm, L 375 mm) is a styrene angle shaped like the letter L for model building, conversions and dioramas.
In stock
1.52 €
Voyager ModelPEA2391:35

1:35 Modern Canadian LAV-3 family stowage bin (For TRUMPETER)

A photo-etched set of stowage bins for the Canadian wheeled vehicles of the LAV-3 family in 1:35 scale is an accessory for a kit you already own, not a standalone model. It replaces coarse plastic bins with thin-walled brass parts from Voyager Model. Intended for the Trumpeter kit.
In stock
9.16 €
ReskitRSU72-03251:72

1:72 MiG-29 Fulcrum centerline PTB-1500 fuel tank (1 pcs)

The PTB-1500 centerline fuel tank for the MiG-29 is a 3D printed resin detail set in 1:72 scale from Reskit. It is a centerline drop tank, not a model of an aircraft.
In stock
9.16 €
AK interactiveAK11762

SIGNATURE SET – HISTORICAL FIGURES S. XVI-XVIII BY PEPE GALLARDO

A signature set of eighteen shades put together for figures of the sixteenth to the eighteenth century. It holds flesh tones, period blues and reds and the earthy colors of broadcloth.
In stock
47.96 €
Artwox ModelAW100201:350

1:350 Imperial Chinese Peiyang Fleet 'Chin Yuen'(For Bronco NB5018)

A wooden deck in 1:350 scale for a model of a cruiser of the Chinese Peiyang Fleet, cut for the Bronco kit number NB5018.
In stock
13.56 €
PSTPST720271:72

1:72 Pz.Kpfw. 753(r) mit 7,5 KwK 40 Heavy Tank

The Pz.Kpfw. 753(r) with the 7.5 KwK 40 gun is a plastic kit of a captured heavy tank in German service in 1:72 scale from PST. The model is supplied unassembled and unpainted.
In stock
10.36 €
ReskitRS48-03451:48

1:48 Mark 82 bomb with Mk.15 Snakeye fins thermally protected (4pcs)

Mk.82 bombs with Mk.15 Snakeye retarding fins in 1:48 from Reskit, thermally protected version, 4 pieces. 3D printed ordnance for models of jet aircraft.
In stock
10.76 €
1:32 F-14D 'Tomcat' Close Exhaust Nozzles For Trumpeter Kit (3D Printed)-25 %Stock ClearanceFavorite
ReskitRSU32-01591:32

1:32 F-14D 'Tomcat' Close Exhaust Nozzles For Trumpeter Kit (3D Printed)

F-14D Tomcat exhaust nozzles in the closed position are an add-on part from the Reskit brand in 1:32 scale. They serve to replace the end section of the engines on the Trumpeter kit.
6 left
39.16 €29.36 € You save 9.80 €
TrumpeterTR009571:16

1:16 Pz.Kpfw.III Ausf.N - Tunisia 1942/1943

A model of the German Pz.Kpfw.III Ausf.N medium tank with the short 7.5 cm gun in the large 1:16 scale. It is supplied as a set of parts to assemble.
In stock
103.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.