1:700 USS Guam CB-2

A plastic kit of the American large cruiser USS Guam in 1:700 scale from Trumpeter. A sizeable model of an Alaska-class ship for a display case.

Scale1:700
Manufacturer Trumpeter
Product EAN8591111000000

Responsibility details are not available.

31.96 € 23.96 €
19.80 € without VAT
−25 % You save 8 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

USS Guam CB-2 1:700 - kit by Trumpeter

An injection-molded plastic kit of the American large cruiser USS Guam in 1:700 scale from Trumpeter. Even at this space-saving ship scale it is a sizeable model; the finished hull is over thirty centimeters long, so it pays to prepare a display case or a stand with plenty of room. The build takes in a great many small superstructures, gun turrets and anti-aircraft positions.

The real subject

USS Guam was the second unit of the Alaska class, the ships the US Navy listed as large cruisers. They came about as an answer to fast enemy cruisers and as escorts for carrier task forces, but in size and armament they came close to smaller battleships. The main armament was nine 305 mm guns in three triple turrets, backed by a dual-purpose and anti-aircraft battery. Guam entered service in 1944 and in the closing stages of the war operated in the Pacific with the fast carrier task forces and in the bombardment of shore targets. Postwar service was short; for their size these ships were expensive to run and quickly ended up in reserve.

Building and painting tips

Decide at the very start whether you want the model waterline or the whole hull on a stand, because the preparation of the base and the painting of the underwater section both follow from that. Paint the decks and the superstructures separately before the final assembly, as that way you reach the covered places too. Glue the small guns, cranes and searchlights on with cyanoacrylate glue once they are already painted. Aftermarket photo-etched railings, ladders and finer radars lift the model considerably, as the plastic parts at this scale are coarse by comparison. To finish, a dark wash into the deck lines, a light edge highlight and a glaze to bring out the wooden deck all help.

Who the model is for

  • collectors of American warships in 1:700 scale
  • modelers who like to add photo-etched parts to ships
  • builders of display-case groupings of the Pacific task forces
  • more experienced modelers, as there are a great many small parts

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Trumpeter often offers that option on ships in 1:700. For this particular box it is the instructions inside that decide.

The parts list is given in the instructions in the box. Railings, ladders and a stand are commonly bought separately for ships at this scale.

Rather for a modeler with some experience. There are a great many superstructures and small anti-aircraft guns, and it calls for tweezers and patience.

In 1:700 scale it will be over thirty centimeters long. The exact size is stated on the box.

Last seen

1:700 USS Guam CB-2-25 %Stock ClearanceFavorite
TrumpeterTR067391:700

1:700 USS Guam CB-2

A plastic kit of the American large cruiser USS Guam in 1:700 scale from Trumpeter. A sizeable model of an Alaska-class ship for a display case.
21 left
31.96 €23.96 € You save 8 €
SBS ModelSBS480761:48

1:48 Hispano Me 109E 'Flying Testbed'

Hispano Me 109E Flying Testbed 1:48 is a resin accessory set from the brand SBS Model intended for converting a plastic model, not a standalone kit of the aircraft.
In stock
23.56 €
U-STARUA91597BL

Metal Sandpaper Sander

Metal Sandpaper Sander is a U-STAR metal sanding holder for work with abrasive paper — a handle that turns ordinary paper into a tool with a firm face and can be used again and again.
In stock
12.36 €
ItaleriIT2161:35

1:35 Opel Blitz

An injection-molded plastic kit of the German truck Opel Blitz in 1:35 scale from Italeri, with a detailed chassis and body.
In stock
19.96 €
Green Stuff WorldGSW9737

Shrink tubes for LED connections

Shrink tubes for LED connections is a set of heat-shrink tubing for insulating and securing the joints of wires in LED lighting. Once heated, the tubing shrinks around the joint.
In stock
1.56 €
Aires/QuickboostQB725631:72

1:72 Yak-3 propeller w/tool

A resin aviation accessory, Quickboost — Yak-3 propeller with an alignment jig (1:72) . This is NOT an airplane model but a replacement resin propeller with an alignment jig.
In stock
6.36 €
EduardED490341:48

1:48 Lancaster seatbelts

Eduard 1:48 Lancaster seatbelts is a color photo-etched set of seat belts for the cockpit of the Avro Lancaster bomber. This is a detail accessory, not a model.
In stock
6 €
EduardED6442331:48

1:48 Bf 109K-4 LööKplus

1:48 Bf 109K-4 LööKplus is a combined add-on set from the Eduard company for the model of the Bf 109K-4 fighter in 1:48 scale. It is not a kit but a set of details for one.
In stock
25.60 €
EduardSS1331:72

1:72 Ju 87D Stuka

Eduard 1:72 Ju 87D Stuka is a photo-etched detail set, not a model. It adds fine metal detail to a plastic kit of the Ju 87D Stuka that injected plastic cannot manage.
In stock
3 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.