1:72 Bell P-400 Airacobra exhaust

Exhausts for the Bell P-400 Airacobra 1:72 (Quickboost) are a resin replacement part for the model of the fighter, not a kit. They replace the less accurate exhausts from the base kit.

Scale1:72
Manufacturer Aires/Quickboost
Product EAN8591111755146

Responsibility details are not available.

3.56 €
2.94 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Exhausts for the Bell P-400 Airacobra in 1:72 scale (Quickboost)

Resin replacement exhausts for the model of the American fighter Bell P-400 Airacobra in 1:72 scale from the Quickboost range, the accessory brand of the Czech firm Aires. It is not an aircraft kit but a stand-alone detail accessory: the parts from the base kit are cut off and replaced with more accurate castings with a crisper shape and an open outlet.

The real subject

The P-400 designation was carried by the export version of the Bell P-39 Airacobra fighter. The Airacobra was unusual among the fighters of its day in the layout of its powerplant: the V engine sat behind the pilot, in the middle of the fuselage, and drove the propeller through a long shaft running under the cockpit floor. That left room in the nose for the nosewheel landing gear and the gun armament, but it also meant that the exhaust stubs came out of the sides of the fuselage at roughly half its length, that is right in the line of sight of a model. That is exactly why their execution shows so much on a model and why it pays to replace them.

Fitting and painting tips

First wash the resin castings in lukewarm soapy water to remove the mold release residue from the surface, otherwise paint will not hold. Cut the casting block off with a fine saw or a cutting disc, and never break it off. Sand wet and with respiratory protection, as resin dust must not be breathed in. It is bonded with super glue (cyanoacrylate); for more time to line the position up, use a slower type or a gel. In color terms the exhausts are built up from a dark base through rust shades and heat discoloration, and the outlet is darkened with graphite or pigment. Spray the smoke stain behind the exhausts with heavily thinned paint in thin coats, and always running aft.

Who the set is for

  • Builders of Airacobra models in 1:72 scale
  • Modelers who are bothered by simplified plastic exhausts with a blanked outlet
  • Anyone interested in working with resin accessories
  • Those who take a model up to competition quality

The accessory is supplied unpainted, as a resin casting. The base model, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. These are only the replacement exhausts, which are fitted to a model built from a kit bought separately in 1:72 scale.

The P-400 was the designation of the export version of the Bell P-39 Airacobra fighter. It differed from the base version above all in its gun armament.

Wash them in lukewarm soapy water because of the mold release residue, cut the casting block off with a fine saw and sand the area wet with respiratory protection. It is glued with cyanoacrylate glue (super glue).

Sets of this kind usually hold exhausts for both sides of the fuselage; it is better to check the contents before buying.

Last seen

Aires/QuickboostQB721451:72

1:72 Bell P-400 Airacobra exhaust

Exhausts for the Bell P-400 Airacobra 1:72 (Quickboost) are a resin replacement part for the model of the fighter, not a kit. They replace the less accurate exhausts from the base kit.
In stock
3.56 €
PANZER ARTRE35-5381:35

1:35 Stowage set for Pz.Kpfw 35(t)

PANZER ART 1:35 stowage set for the Pz.Kpfw 35(t) is a resin set of accessories that gives a model of this light tank realistic stowage and crew kit. It is not a tank kit.
In stock
23.96 €
Art ScaleASKM481451:48

1:48 Spitfire Mk.XVI one-sided express fit mask for Eduard

Art Scale 1:48 Spitfire Mk.XVI one-sided express fit mask is a set of pre-cut self-adhesive masks for the glazing of the Spitfire Mk.XVI in 1:48 scale. The single-sided form is meant for the outer face of the clear parts. Intended for Eduard kits.
In stock
6.76 €
MontexMXSM485531:48

1:48 CW-21B Canopy (outside, inside) & Wheels Paint Mask for Dora Wings kits

A masking set 1:48 CW-21B for the cockpit glazing and for the wheels. The name gives the glazing from the outer and the inner side together with the wheels.
In stock
5.16 €
BOLTBolt222

BOLT TUBE 1,0 mm (Aplikační trubička) 50cm

BOLT TUBE 1.0 mm is an applicator tube 50 cm long for accurate and clean dosing of super glue and other liquids during a build.
In stock
2.76 €
Quinta StudioQD321021:32

1:32 T-6G 3D-Printed & coloured Interior on decal paper (Kitty Hawk)

1:32 T-6G - 3D printed color decals of the interior (Kitty Hawk) from Quinta Studio will refine the cockpit of the trainer without photo-etched parts and without painting the instruments.
In stock
25.16 €
QuickwheelQWX-201:35

1:35 Sd.Kfz. 250 & 10 - Front Wheels Uncommon Off-Road (Continental)

Replacement front wheels for the Sd.Kfz. 250 and Sd.Kfz. 10 light half-track vehicles in 1:35, with a less usual off-road tread carried under the Continental marking.
In stock
10.36 €
1:48 Bristol Beaufighter Mk.IF landing flaps-25 %Stock ClearanceFavorite
EduardED4810341:48

1:48 Bristol Beaufighter Mk.IF landing flaps

The photo-etched set 1:48 Bristol Beaufighter Mk.IF landing flaps from Eduard replaces the landing flaps on a model of this British twin-engine aircraft. It is an accessory for a kit, not a model.
5 left
31.80 €23.84 € You save 7.96 €
EduardED324771:32

1:32 North-American B-25H exterior

1:32 North American B-25H exterior is an Eduard photo-etched set for the external details of a model of the North American B-25H Mitchell bomber in 1:32 scale.
In stock
27.80 €
Artwox ModelAW200831:700

1:700 IJN Submarine Tender Jingei (For Pitrod W36)

A wooden deck in 1:700 scale for a model of the Japanese submarine tender Jingei, cut for the Pit-Road W36 kit.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.