29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:72 Cobalt Co50 Valkyria

The Amodel 1:72 Cobalt Co50 Valkyrie plastic kit captures a modern single-engine aircraft in a canard configuration with a pusher propeller.

Scale1:72
Manufacturer Amodel
Product EAN8591111764339

Responsibility details are not available.

27.56 € 20.68 €
17.09 € without VAT
−25 % You save 6.88 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The Cobalt Co50 Valkyrie in 1:72 scale from the manufacturer Amodel

An injection-molded plastic kit from the Ukrainian manufacturer Amodel in 1:72 scale. Amodel has long devoted itself to short-run molds and to subjects the large manufacturers do not offer. The character of the build goes with that: the parts tend to have more prominent gates and parting lines and you have to reckon with cleaning them up by hand and with test-fitting dry. The reward is a model of an aircraft that practically does not occur in plastic elsewhere.

The real subject

The Cobalt Co50 Valkyrie is a modern single-engine general aviation aircraft of American origin. It has a canard configuration with a forward horizontal lifting surface and with a pusher propeller placed behind the cabin, a bubble canopy and a very cleanly shaped fuselage. The design aimed at a high cruising speed and a roomy cabin for the pilot and several passengers. The prototype flew in the middle of the previous decade and, given its unusual configuration, the machine is among the most conspicuous aircraft of its category.

Building and painting tips

With short-run molds it pays to try every part dry first and only then to glue it. The joints of the fuselage and the attachment of the lifting surfaces usually want a little filler and sanding over. Glue with a thin cement for plastic, which wicks into the seam and does not clog detail. The smooth shapes of the aircraft will reveal every unevenness, so spray the surface with a filler primer before painting and sand any scratches over with fine abrasive paper. Paint with an airbrush in thin coats; with glossy civilian schemes the key is a perfectly prepared base. Gloss varnish under the decals will prevent them from silvering, and a final varnish will unify the surface.

Who the model is for

  • collectors of modern civil and experimental aviation
  • modelers with experience of short-run kits
  • those looking for an unusual subject for a display case in 1:72 scale
  • builders who enjoy working on a smooth glossy surface

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Rather not. It is a short-run mold, where the parts need cleaning up, dry fitting and reckoning with filling the joints.

The horizontal lifting surface is ahead of the main wing, not behind it. The aircraft therefore looks as if it were flying backward and has a markedly different silhouette.

No. The model is supplied unassembled and unpainted; glue and paints have to be bought separately.

A thin cement for polystyrene applied into the seam with a fine brush. For small clear parts a canopy glue is more suitable.

Last seen

1:72 Cobalt Co50 Valkyria-25 %Stock ClearanceFavorite
AmodelAMOD723721:72

1:72 Cobalt Co50 Valkyria

The Amodel 1:72 Cobalt Co50 Valkyrie plastic kit captures a modern single-engine aircraft in a canard configuration with a pusher propeller.
2 left
27.56 €20.68 € You save 6.88 €
FujimiFU046951:24

1:24 Toyota Celsior C type '89

The Toyota Celsior C type of 1989 in 1:24 scale, a model of the luxury sedan that shook up the world market.
In stock
23.16 €
EduardED6487451:48

1:48 F-15E/ I/K wheels

Eduard 1:48 F-15E/I/K resin wheel set is a resin detail accessory that replaces the plastic wheels of the model with precise castings featuring fine tread and a realistic tire load.
In stock
6.80 €
Aires/QuickboostQB723831:72

1:72 Su-27 Flanker B correct nose

Quickboost 1:72 Su-27 Flanker B correct nose shape is a resin replacement for the forward fuselage with the correct shape for a model of the Soviet Sukhoi Su-27 Flanker B fighter.
In stock
6.36 €
IBG modelsIBG721081:72

1:72 Centaur Mk.IV British Tank

Centaur Mk.IV in 1:72 scale is an injection-molded plastic kit of the British fire support tank of the Second World War from IBG Models.
In stock
16.76 €
Dynamo-ModelsDNMA90010-40

US 1st Cavalry Division Plaque 40mm

US 1st Cavalry Division Plaque 40mm is a diorama plaque with the emblem of the American 1st Cavalry Division in a 40 mm size from Dynamo-Models. It completes a base or a scene; it is neither a model nor a kit.
In stock
3.96 €
Kovozávody ProstějovKPM02961:72

1:72 Spitfire PR. Mk.XI „D-Day Markings“

An injection-molded plastic kit of the reconnaissance Supermarine Spitfire PR Mk.XI with D-Day markings in 1:72 scale from the Czech manufacturer Kovozavody Prostejov.
In stock
15.96 €
EduardCX5401:72

1:72 Convair B-58 Hustler

A set of 1:72 painting masks for the Convair B-58 Hustler model — precisely shaped self-adhesive masks for painting the frames of the cockpit glazing cleanly.
In stock
8 €
AiresAIR45281:48

1:48 Me 262A Schwalbe cockpit set

A resin Aires cockpit set for the Me 262A Schwalbe in 1:48 scale . It is not a model but a resin detail set for the interior of an existing kit.
In stock
16.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.