A masking set for the glazing of the British experimental Gloster E.28/39 aircraft for Clear Prop kits in 1:72 scale.
Responsibility details are not available.
The Gloster E.28/39 was a small British experimental aircraft from the start of the jet era. Compared with later machines it has a tiny cockpit with fine glazing framing, so on a model in 1:72 scale every inaccurate transition between glass and frame shows at once. It is precisely on a model this small that the cleanliness of the work on the glazing decides the overall impression.
The masking set is prepared for Clear Prop kits in 1:72 scale. The ready shapes copy the frames of the glazing, so cutting strips of adhesive tape by eye is unnecessary and the edges come out straight even on curved surfaces, where tape likes to wrinkle and paint creeps under it. On a model of this size the glazing forms a substantial part of what is visible of the cockpit, so accuracy pays off twice over.
First wash and degrease the glazing and let it dry completely. Lay the masks on before spraying, press the edges down with a toothpick and apply the paint in several thin coats. It has proved best to spray the frames first in the interior color and only then in the exterior shade, so that the frame is not light from inside. Take the masks off shortly after the paint has dried by pulling at an angle to the surface and wipe any adhesive residue off with a soft cloth.
The set is intended for builders of small models in 1:72 scale who want the glazing sharp and without paint creeping over. The kit, the paints and the glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!