1:72 Mask F-104 J/G/S,CF-104 Starfighter ADVANCED

1:72 Mask F-104 J/G/S,CF-104 Starfighter ADVANCED

5.56 €
Add to Cart

1:72 Mask F-104 J/G/S,CF-104 Starfighter ADVANCED

The F-104 J/G/S and CF-104 Starfighter ADVANCED 1:72 mask set is an extended set of pre-cut self-adhesive templates from New Ware for models of the Starfighter versions named above.

Scale1:72
Manufacturer New Ware
Product EAN8591111735001

Responsibility details are not available.

5.56 €
4.60 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

F-104 J/G/S and CF-104 Starfighter ADVANCED 1:72 mask set (New Ware)

A mask set for models of the single-seat Starfighter in 1:72 scale, specifically for the F-104J, F-104G, F-104S and CF-104 versions. The package holds a carrier sheet with pre-cut self-adhesive shapes. It is not a kit or a spare part, but an aid for the painting stage. The ADVANCED designation describes the scope of the set: it is the extended level, which offers more than the basic BASIC level and less than the widest EXPERT level.

One set for several versions

The versions named above differ from one another in equipment and armament, but the shape of the cockpit and the glazing is essentially the same, which is why one set of masks can cover several of them. The practical consequence for the buyer is that the set also suits you when you build a different version from the one you had planned. Before buying, though, check that your kit matches the mold the set is cut for; the shapes are made for specific parts and with another manufacturer the division of the glazing may differ.

How to work with the masks

The Starfighter has a slender fuselage and a small canopy, so the offcuts are tiny and handling them calls for sharp tweezers and a steady hand. Degrease the glazing first. Seat the mask dry, check that it matches the frame and then press it down with a toothpick all the way around. Apply the paint in several thin coats. Take the mask off shortly after drying, folding it back over itself. Store the rest of the sheet flat, out of direct light.

Who the set is for

  • Modelers building the Starfighter in the J, G, S or CF-104 version in 1:72 scale.
  • Those who want an extended masking scope, not just the basics.
  • Builders who struggle to draw the small frames of a small canopy with a brush.
  • Anyone building several versions of the same aircraft.

The package holds only the masking templates. The kit, paints and glue are not part of it, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. These are masking templates for painting. The model has to be bought separately.

According to the name it is intended for the F-104J, F-104G, F-104S and CF-104 versions. The shapes are cut for specific parts, though, so check the match with your own kit before buying.

It describes the scope of the set. It is the extended level between the basic package and the widest variant. The exact list is given by the manufacturer on the box.

Sharp tweezers, good light and seating the mask dry before you press it down all help. Apply pressure only once you have checked the position.

Last seen

New WareNWAM05481:72

1:72 Mask F-104 J/G/S,CF-104 Starfighter ADVANCED

The F-104 J/G/S and CF-104 Starfighter ADVANCED 1:72 mask set is an extended set of pre-cut self-adhesive templates from New Ware for models of the Starfighter versions named above.
In stock
5.56 €
1:48 F-22A seatbelts STEEL-25 %Stock ClearanceFavorite
EduardFE10151:48

1:48 F-22A seatbelts STEEL

Photo-etched seat belts for an F-22A model in 1:48 scale in the STEEL version, that is in steel. They replace belts that are usually only suggested on the seat.
Last one!of 6
6.80 €5.12 € You save 1.68 €
HaulerHQT009

stainless saw for scalpel holder nr.4 (big)

A stainless modeling saw for the No. 4 scalpel handle from the maker Hauler is a tool for the precise separation of plastic, resin and metal parts with a minimal width of cut.
In stock
8.40 €
PeewitPWM410021:48

1:48 P-51D/P-51K / Mustang Mk.IV

Masking set 1:48 P-51D/P-51K, Mustang Mk.IV from the manufacturer Peewit is an accessory for covering the glazing of a model during spraying. It is not a kit of the aircraft.
In stock
3.16 €
77propellerPRP70071:72

1:72 Wheels Heinkel He- 219 For Hobby 2000 and Dragon kit

77propeller 1:72 Wheels Heinkel He 219 is a resin wheel set for the He 219 night fighter that replaces the plastic parts with a truer rendering and weighted tires.
In stock
11.16 €
Yamamoto Model PartsYMPENG11:24

1:24 BMW N46 Yamamoto Spec engine - naturally aspirated

A detail set, the BMW N46 engine in the Yamamoto Spec version, naturally aspirated, in 1:24 scale. It is not a car kit but an accessory to be installed in a model.
In stock
21.16 €
HaulerHLX482071:48

1:48 Panther G ERSATZ M-10 (TAMIYA)

The Hauler 1:48 Panther Ausf. G Ersatz M10 conversion set rebuilds a plastic Panther model into a machine disguised to look like an American tank destroyer. An accessory, not a kit.
In stock
23.56 €
Green Stuff WorldGSW8624

Rolling Pin Madness of Cthulhu

Rolling Pin Madness of Cthulhu is a Green Stuff World texture roller with which an organic pattern of tentacles in the spirit of cosmic horror is impressed into rolled-out modeling compound. It is not a paint and not a kit, but a modeling aid for repeated use.
In stock
13.16 €
1:35 M-1134 ATGM mounted rack and belts-25 %Stock ClearanceFavorite
EduardED361021:35

1:35 M-1134 ATGM mounted rack and belts

Eduard 1:35 M-1134 ATGM mounted rack and belts is a photo-etched set of stowage racks and securing straps for the wheeled M-1134 vehicle. It is an accessory for a plastic kit, not a model.
Last one!
11.80 €8.84 € You save 2.96 €
AberABR250021:25

1:25 German tool holders - late used from 1943 1:25 scale model

German tool clamps – the late type from 1943 (1:25) is an Aber photo-etched set for faithfully mounting the tools on models of German vehicles.
In stock
11.40 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.