Rolling Pin Madness of Cthulhu

Rolling Pin Madness of Cthulhu is a Green Stuff World texture roller with which an organic pattern of tentacles in the spirit of cosmic horror is impressed into rolled-out modeling compound. It is not a paint and not a kit, but a modeling aid for repeated use.

Manufacturer Green Stuff World
Product EAN8591111000000

Responsibility details are not available.

13.16 €
10.88 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Rolling Pin Madness of Cthulhu — a Green Stuff World texture roller

A texture roller is an aid, not a model and not a paint. Around its whole circumference it carries a relief pattern that is impressed into rolled-out modeling compound in a single pass. According to the name the motif is one of tentacles and organic, slightly repulsive structures in the spirit of cosmic horror — that is a pattern that suits the bases of monsters, the floors of cult shrines and surfaces where it should be obvious that something has bitten into them. The roller is intended for use many times over; the consumable is only the compound into which it is impressed.

How the roller is used

  • Roll the compound out on a smooth surface to an even thickness — two-part modeling compound, polymer compound and self-hardening clay all work.
  • Lightly moisten the roller and the compound or dust them with release agent, so that the pattern is not torn out.
  • Go over it in one smooth pass with steady pressure and do not go back — a double impression smears the pattern.
  • Cut the still soft sheet to shape with a sharp knife and only then transfer it onto the base or the groundwork board.
  • Clean the roller before the compound sets; dried residue is hard to remove from fine relief.

Painting the impressed structure

Once it has cured, sand the surface only where it is necessary and spray a base coat. Organic patterns of this kind come alive with a combination of a dark wash run into the recesses and drybrushing on the raised edges; the transitions between the dark floor and the light high points make up most of the final impression.

Who it is for

  • Modelers of fantasy and horror dioramas.
  • Tabletop gamers who bring the bases of a whole army into line.
  • Hobbyists who make their terrain and surfaces themselves instead of buying finished parts.

Modeling compound, a surface to work on, glue and paints are not included in the package, unless stated otherwise. Protect your airways when sanding cured compounds and work in a ventilated space.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Neither. It is a tool — a roller with a relief pattern with which you impress the structure into modeling compound of your own. The package holds neither the compound nor paints.

Into any that is plastic at the moment of impressing: two-part modeling compounds, polymer compounds and self-hardening clays. What matters is an even thickness of the sheet and that the compound does not stick to the roller.

Lightly moisten the roller or the compound with water, or use a release agent or a fine dusting. Then make the impression in one pass, without backing up.

Ideally right after use, while the compound is still soft — with lukewarm water and a soft brush. Cured residue is far harder to pick out of fine relief.

Last seen

Green Stuff WorldGSW8624

Rolling Pin Madness of Cthulhu

Rolling Pin Madness of Cthulhu is a Green Stuff World texture roller with which an organic pattern of tentacles in the spirit of cosmic horror is impressed into rolled-out modeling compound. It is not a paint and not a kit, but a modeling aid for repeated use.
In stock
13.16 €
1:35 M-1134 ATGM mounted rack and belts-25 %Stock ClearanceFavorite
EduardED361021:35

1:35 M-1134 ATGM mounted rack and belts

Eduard 1:35 M-1134 ATGM mounted rack and belts is a photo-etched set of stowage racks and securing straps for the wheeled M-1134 vehicle. It is an accessory for a plastic kit, not a model.
Last one!
11.80 €8.84 € You save 2.96 €
AberABR250021:25

1:25 German tool holders - late used from 1943 1:25 scale model

German tool clamps – the late type from 1943 (1:25) is an Aber photo-etched set for faithfully mounting the tools on models of German vehicles.
In stock
11.40 €
1:48 Bristol Beaufighter Mk.VI 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS485541:48

1:48 Bristol Beaufighter Mk.VI 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)

Bristol Beaufighter Mk.VI 1:48 - colored 3D cockpit details on a paper carrier , the smaller extent of the set from Quinta Studio. It will replace the flat details of the pilot's and the operator's stations. The set is intended for the Tamiya kit.
3 leftof 4
14.76 €11.08 € You save 3.68 €
1:35 Modern US Machine Gun Blank Firing Adapter set (US vehicles)-25 %Stock ClearanceFavorite
DEF ModelDM351301:35

1:35 Modern US Machine Gun Blank Firing Adapter set (US vehicles)

1:35 set of machine gun blank firing adapters from DEF Model is a resin accessory for modern American military vehicles. It is not a model of a weapon but a small detail fitted onto the muzzle of a barrel.
Last one!of 3
11.56 €8.68 € You save 2.88 €
EduardEX8111:48

1:48 Boeing F/A-18E Super Hornet

A masking set in 1:48 scale for a model of the Boeing F/A-18E Super Hornet. Pre-cut templates for sharp edges on the glazing and other areas.
In stock
7 €
Artwox ModelAW201431:700

1:700 IJN Battleship Yamashiro 1944(For Aoshima 002513)

Wooden deck 1:700 for the IJN battleship Yamashiro (1944) is a veneer accessory with pre-printed plank laying and a self-adhesive backing, made for the plastic kit of the Japanese battleship Aoshima 002513 in its late configuration.
In stock
14.36 €
Quinta StudioQD321381:32

1:32 Ar 196A/B 3D-Printed & coloured Interior on decal paper (Revell)

3D interior decal for the Arado Ar 196A/B in 1:32 scale from Quinta Studio: a relief color cockpit decal for the Revell kit. It is not a model but a detail accessory.
In stock
20.76 €
Aires/QuickboostQB489111:48

1:48 Bristol Beaufighter cockpit´s doors

Bristol Beaufighter cockpit doors 1:48 is a Quickboost (Aires) resin detail set that replaces the plastic doors of the cockpit with a more accurate casting with a clear part.
In stock
6.36 €
MASTERSM3500701:350

1:350 USN 8"/55 (20.3 cm) Mark 9 barrels (9pcs)

MASTER 1:350 USN 8in/55 Mark 9 (9 pieces) is a set of turned metal barrels for American naval guns of 203 mm caliber.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.