20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:72 Piaggio PC 7 Pegna

1:72 Piaggio PC 7 Pegna is a resin kit of the Italian racing seaplane for experienced modelers. It is supplied unassembled and unpainted.

Scale1:72
Manufacturer SBS Model
Product EAN8591111000000

Responsibility details are not available.

36.36 €
30.05 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Piaggio PC 7 Pegna in 1:72 scale, a resin kit

A complete kit in 1:72 scale whose parts are cast in resin. It is a resin kit for experienced modelers: the parts are not cut from sprues but sawn off casting blocks, they are glued with cyanoacrylate, and before building they have to be washed free of mold release agent. The kit is supplied by the SBS Model brand.

The real subject

The Piaggio-Pegna is one of the most unusual aircraft ever built. The machine was designed by the engineer Giovanni Pegna at the end of the 1920s as an Italian contender for the Schneider Trophy seaplane races. Pegna decided to do without conventional floats, whose drag held back the take-off run: the fuselage was to float on the water by itself and during the run gradually rise above the surface on hydrofoils mounted beneath it. A marine propeller therefore served for the take-off run, and only once the aircraft had risen clear was the drive switched to an air propeller in the nose. It was a bold concept that did not prove itself in practice, and the aircraft never took part in the race. That makes it all the more interesting a subject for collectors of racing and record-breaking machines.

Building and painting tips

First wash all the parts in warm water with detergent, as mold release agent residue would otherwise prevent the primer and the glue from adhering. Saw the casting blocks off with a fine-toothed saw and do not snap them off. Do the sanding with respiratory protection, ideally wet. Resin is glued with cyanoacrylate, as polystyrene cement has no effect on it; on larger surfaces two-part epoxy helps, as it gives time to set the parts in place. Apply a filler primer before painting; it reveals small bubbles in the casting, which are filled with putty. The glossy finish of racing machines forgives little, so polish the surfaces carefully before painting.

Who the model is for

  • Experienced modelers with experience of resin kits
  • Collectors of racing and record-breaking aircraft in 1:72 scale
  • Anyone interested in unconventional design concepts
  • Those looking for a striking piece for the display case outside the usual subjects

The model is supplied unassembled and unpainted as a resin kit. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. The parts are cast in resin, so they are sawn off casting blocks and glued with cyanoacrylate. Ordinary polystyrene cement has no effect on resin.

We recommend it rather to more experienced modelers. Resin kits call for washing the parts, sawing off the casting blocks, sanding with respiratory protection and gluing without the chance to undo a joint as on plastic.

The contents of the package, the number of parts and the decals are stated on the box and in the enclosed instructions.

The machine was built as a contender for the Schneider Trophy seaplane races, but its unusual concept did not prove itself in practice and it never took part in the race.

Last seen

SBS ModelSBS70251:72

1:72 Piaggio PC 7 Pegna

1:72 Piaggio PC 7 Pegna is a resin kit of the Italian racing seaplane for experienced modelers. It is supplied unassembled and unpainted.
In stock
36.36 €
SEPIA LEAD-25 %Stock ClearanceFavorite
AK interactiveAK4186

SEPIA LEAD

A weathering product in the warm brown sepia shade, a glaze for bringing out shadows and traces of use. The method of application is stated by the manufacturer on the packaging.
7 leftof 10
2.36 €1.76 € You save 0.60 €
MontexMXK482371:48

1:48 D-520

A masking set for the French Dewoitine D.520 fighter in 1:48 scale. Prepared for the Tamiya kit. Inside there are films for the glazing from the outside and the inside, a sheet of insignia masks and decals.
In stock
11.56 €
Alfa BT Red (17ml)
-20 %
Favorite
AK interactiveRC832

Alfa BT Red (17ml)

A red shade from the Real Colors range in a volume of 17 ml, carried under the designation Alfa BT. Meant for the bodywork of racing car models.
In stock
2.76 €2.21 € You save 0.55 €
1:48 SB2U vindicator exhaust
-20 %
Favorite
Aires/QuickboostQB484251:48

1:48 SB2U vindicator exhaust

A resin set of exhausts for the SB2U Vindicator in 1:48 scale from Quickboost. Faithful exhaust pipes; this is not an airplane model.
In stock
4.76 €3.81 € You save 0.95 €
1:24 Subaru 360 -25 %Stock ClearanceFavorite
HasegawaHA204941:24

1:24 Subaru 360 "Convertible"

1:24 Subaru 360 Convertible is a plastic kit of the Japanese people's car in the form with a roll-back fabric roof, from Hasegawa.
3 leftof 4
33.56 €25.16 € You save 8.40 €
New WareNWAM10731:48

1:48 B-26 Invader BASIC kabuki mask

A set of self-adhesive masking stencils made of kabuki tape for a model of the B-26 Invader in 1:48 scale, in the basic BASIC extent. An accessory to a finished kit.
In stock
7.96 €
Green Stuff WorldGSW4095

Metallic Paints Set - Silver

Metallic Paints Set - Silver is a set of Green Stuff World metallic paints pitched toward silver metal tones. The set covers graded shades of silver for work with metal surfaces.
In stock
19.96 €
GasPatch modelsGP18-241301:24

1:24 Vickers Hyland Type E 1/24 (Pair)

Vickers Hyland Type E 1:24 is a pair of resin castings of the British Vickers aircraft machine gun in the stated variant. It is an accessory for a model, not a kit.
In stock
17.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.