1:72 Wall with gate base is a Black Dog diorama baseplate in 1:72 scale with a wall and a way through. It will serve as a background and as a free-standing corner alike.
Responsibility details are not available.
Under this name Black Dog offers a vertical item of setting in 1:72 scale: a wall interrupted by a gate. Such a part deals with two things at once in a diorama. It closes the composition off from behind and at the same time opens a view through which movement can lead into the display.
A vertical face behind a model separates the action from the surroundings of the display case and the machine stops being lost in the background. Do not place the gate on the axis of the baseplate; shifted to one side it acts more naturally and leaves a free place in front of it for a figure or a little heap of equipment. If you are displaying an aircraft model, the wall will serve as the boundary of an airfield site. Before you glue anything permanently, arrange the whole provisionally and photograph it with a phone; in the shot any imbalance jumps out at once, whereas looking from above you will miss it.
Stone and plaster will take plenty of layers. After the filler apply a mid gray-beige base, then a thin dark coat into the joints and finally run a dry brush over the edges. Draw the patches of damp from the top downward, never across; water runs down a wall and this small detail decides the conviction more than exactly mixed paint.
The wall arrives in a raw state; all the paint coat and the patina are up to you.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!