SALE CONTINUES! Up to 70% off plastic model kits. Limited stock remaining on selected items! here

200mm Chinese J-20 Mighty Dragon (Series 200mm)

Hobby Boss J-20 Mighty Dragon is a plastic kit of the Chinese fighter from the line with a standardized model length of around 200 mm, which is not built to a fixed modeling scale.

Manufacturer Hobby Boss
Product EAN8591111000000

Responsibility details are not available.

10.36 € 7.76 €
6.41 € without VAT
−25 % You save 2.60 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Chinese J-20 Mighty Dragon — plastic kit of the 200 mm length line from Hobby Boss

This kit belongs to a line in which the manufacturer standardizes the models not by scale but by the resulting length of the finished model, which is approximately 200 mm. Each type of aircraft is therefore reduced by a different ratio, and models from this line cannot be put together into a scale-consistent display case beside ordinary 1:72 or 1:48 kits. The point of the line is to offer quickly built models of a uniform size. The model is injection-molded in polystyrene and is supplied unassembled and unpainted; the particular number of parts and the way they join are given in the instructions in the package.

The real subject

The Chengdu J-20, nicknamed Mighty Dragon, is a Chinese twin-engined fighter designed with the emphasis on reducing radar signature. Its characteristic silhouette comes from the canards ahead of the main wing, the intersecting slopes of the fuselage sides and the splayed vertical tails. The canard layout is unusual on aircraft of this category and, together with the long, smoothly shaped fuselage, forms one of the most recognizable modern aircraft shapes. The model therefore appeals beyond a narrowly modeling audience as well.

Building and painting tips

Models in this line tend to have fewer parts and a simpler breakdown than full scale kits, yet it pays to fill and sand the seams, because on the smooth surfaces of low-signature aircraft every unevenness shows. Apply the gray shades in thin coats over a primer and liven up the individual panels with a slight change of tone, so that the surface does not look flat. Avoid overdone emphasis of the panel lines; modern machines with smooth transitions look more convincing with discreet paneling. Mask the cockpit glazing and clear coat it together with the fuselage, so that the frames line up.

Who the model is for

  • Anyone interested in modern aircraft and unusual designs
  • Modelers who want a quick build without a large investment of time
  • Collectors building a collection of models of a uniform size
  • Beginners looking for a model with a striking silhouette

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The model is not built to a fixed scale. The line is standardized by the length of the finished model, which is approximately 200 mm, so the reduction ratio differs between the individual types.

It will not match in size. Models in this line have a uniform length regardless of the real size of the subject, so they do not suit a scale-accurate display case.

Yes. The line is conceived as a quick and simple build. The exact number of parts and the way they join are given in the instructions in the package.

With ordinary cement for polystyrene and modeling paints. For the smooth surfaces of this aircraft an airbrush and a primer come in handy; an even gray area is difficult to do with a brush.

Last seen

200mm Chinese J-20 Mighty Dragon (Series 200mm)-25 %Stock ClearanceFavorite
Hobby BossHB81902

200mm Chinese J-20 Mighty Dragon (Series 200mm)

Hobby Boss J-20 Mighty Dragon is a plastic kit of the Chinese fighter from the line with a standardized model length of around 200 mm, which is not built to a fixed modeling scale.
4 left
10.36 €7.76 € You save 2.60 €
Artwox ModelAW100581:350

1:350 Antarctica Obsevation Ship SOYA(1st) (For Haseawa 40080)

A wooden deck in 1:350 scale for a model of the Japanese Antarctic research ship Soya, cut for the Hasegawa 40080 kit.
In stock
14.76 €
UMUM3991:72

1:72 T-70M tank with 76 vv ZIS-3 gun

A kit of the Soviet T-70M light tank with the 76 mm ZIS-3 gun in 1:72 scale. The model is supplied unassembled and unpainted.
In stock
17.96 €
New WareNWAM03821:48

1:48 Mask C-130 E/J/H,AC-130 Hercules ADVAN. (ITA)

A C-130 Hercules 1:48 masking set – ADVANCED from New Ware: die-cut masks for the glazing including the frames, the clear parts and the wheels of C-130 E/J/H and AC-130 Hercules models in 1:48 scale.
In stock
9.16 €
Dead DesignUC720751:72

1:72 Convair F-102 Delta Dagger - Under Carriage Bays Mask Meng

Delta Dagger F-102 in 1:72 - landing gear bay masking, Meng keeps the bay interior separated from the external coat.
In stock
4.76 €
Kits-WorldKWM4810441:48

1:48 Messerschmitt Bf-109 E - Luftwaffe Insignia Mask Part Two - 4 part mask set and decal sheet

A four-part masking set for the Luftwaffe national insignia for the Messerschmitt Bf 109 E in 1:48 scale, supplemented by a sheet of decals.
In stock
34.36 €
KajikaKM710201:700

1:700 IJN Battlecruiser Haruna 1915 Wooden deck

A wooden deck for a model of the Japanese battlecruiser Haruna in her 1915 form, 1:700 scale , brand Kajika. It is not a kit of the ship — it is an accessory made of real veneer with an adhesive backing.
In stock
19.96 €
AFV ClubAG350121:35

1:35 7,5cm Anti-tank gun PaK 40 Pressed Brass Shield

The 7.5 cm PaK 40 Pressed Brass Shield is a pressed brass gun shield in 1:35 scale for the German anti-tank gun of 7.5 cm caliber PaK 40.
In stock
12.76 €
1:48 F-4G early 3D-Printed & coloured Interior on decal paper (Meng)-25 %Stock ClearanceFavorite
Quinta StudioQD483411:48

1:48 F-4G early 3D-Printed & coloured Interior on decal paper (Meng)

Quinta Studio 1:48 F-4G early are color 3D-printed interior decals on decal paper. They give the cockpit of a Phantom model in the Wild Weasel version three-dimensional and already colored detail. Target kit: Meng.
4 left
43.16 €32.36 € You save 10.80 €
New WareNWAM02851:48

1:48 Mask Grumman F-14A/B/D Tomcat EXHAUST NOZZLES

An F-14 Tomcat (A/B/D) 1:48 masking set for the exhaust nozzles from the Czech maker New Ware. Kabuki masks for painting the engine nozzles cleanly.
In stock
2.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.