A trapezoid melt head of 2.9 mm is a wider interchangeable tip for a heated pen, meant for larger hollows with sloping walls.
Responsibility details are not available.
When a deformation is to be apparent from a distance, a small hollow is not enough. The name gives a trapezoid cross section and a value of 2.9 mm, that is a tip for more extensive interventions whose walls slope to the surface. The result resembles a surface bent by an impact, where the material gave way over a larger area and the edge nowhere forms a sharp step.
A more extensive hollow calls for patience: rather three times briefly than once at length. Between touches let the plastic harden for a moment, so that the mark does not run off to the sides. Once the shape is finished, go over the edges with a finer tip and break them up irregularly, because a perfectly symmetrical hollow gives the tool away and the viewer then sees technique, not a story. Before fitting, check that the seating surface is clean; baked-on remnants from earlier work pass heat unevenly.
For builders of larger scales and scenes with trucks, containers and equipment that is to show its service. Keep a glowing tip away from paints and thinners, their fumes are flammable. In the name of the item you will find neither the material of the tip nor the device it is fitted into, so compare the holder beforehand.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!