An Aber 1:35 turned metal barrel for the 50 mm KwK 39 L/60 gun of the Pz.Kpfw. III Ausf. J late, L and M tanks replaces the plastic part from the kit.
Responsibility details are not available.
An Aber turned metal barrel in 1:35 scale for the long 50 mm KwK 39 tank gun with a barrel length of 60 calibers, which armed the Pz.Kpfw. III tanks in the late Ausf. J form and further the Ausf. L and M versions. The detail accessory replaces the plastic barrel from the kit.
The Pz.Kpfw. III went through several rearmings during the war. After the inadequate 37 mm gun and the shorter 50 mm gun with a barrel length of 42 calibers, the later versions received the longer KwK 39 gun with a barrel length of 60 calibers, which markedly improved the penetrating power. This weapon was carried by machines of the late Ausf. J form and the following Ausf. L and M versions, recognizable among other things by the characteristic muzzle brake and the conspicuously longer barrel overhanging the outline of the hull. This is the most widespread form of this tank from the fighting on the Eastern Front.
The metal barrel is fitted in place of the plastic part. Cut off the plastic barrel, level the seating surface and try the part dry first for the axis and the depth of seating. Use cyanoacrylate glue or a two-part epoxy; plastic cement has nothing to dissolve here. Degrease the metal and go over it with a primer for metal, or the paint will not hold on the smooth surface. Filling and sanding the mold seam and drilling the muzzle of the barrel fall away.
This is a supplementary detail set for modelers, not a kit. The model itself, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!